MOTORCYCLE PHONE HOLDER 22MM & 25MM - WITH LOCKING MECHANISM
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
MOTORCYCLE PHONE HOLDER 22MM & 25MM WITH LOCKING MECHANISM
- Ocena
- 5 / 5
- Polubienia
- 40
- Pobrania
- 240
- Wydruki
- 5
- Wyświetlenia
- 2427
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Public Domain
Motorcycle Phone Holder - With locking mechanism
This is a phone holder for all motorcycles with a 22mm and 25mm handlebar thickness. Designed with a locking mechanism similar to the Quadlock system.
Since I didn't find any FREE models that a was satisfied with, I started designing mine.
NOTE: Since this is an outdoor model suggested material for printing is PETG or even better ABS if you have the ability to print with it.
Also, please use quality DoubleSided Tape to avoid losing your phone.
Additional Materials that you need are:
- 2x XMH 5.8 20mm screws with washers and lock nuts
- 1x 4x25mm screw with washer and lock nut
- Quality DoubleSided Tape
Official version 2.0 is available from the 2nd of May 2023.
Happy printing
3D PRINTING SETTINGS
Version 2.0 for 22mm handlebar:
Layer height: 0.2mm
Infill: 50%
Parameters: 3
Supports: Yes
Brim: Yes
The first layer in: ~24m
Print time: ~ 4h30m
Filament consumption: ~42g ~14m
Version 2.0 for 25mm handlebar:
Layer height: 0.2mm
Infill: 50%
Parameters: 3
Supports: Yes
Brim: Yes
The first layer in: ~29m
Print time: ~ 5h50m
Filament consumption: ~58g ~19.5m