1 / 1
Ender 3 v2 feet risers (22mm)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Printable feet risers for better mainboard/psu cooling
- Rating
- 5 / 5
- Likes
- 35
- Downloads
- 193
- Makes
- 1
- Views
- 968
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- GNU General Public License v3.0
22mm risers for stock rubber feet on Ender 3 v2.
Required hardware:
- 14 - M5 x 8mm screws
- 14 - M5 t-nuts
Very small portion of back feet requires supports (touching buildplate only)
Recommended filament type: PLA, if printer is inside enclosure - PETG, ABS or something similar with higher temperature resistance.
Print 2 x front_foot.stl (front feet are identical).
1 of each back_foot_right.stl and back_foot_left.stl.
You will have to remove 1 screw on each side from PSU tray closest to the back.
In case you want to modify this design, Fusion 360 file is attached.