Cash Box Tray (look Measurements)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cash Box Tray for old WEDO Model.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 301
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Cash Tray for an old WEDO Cash box
I found this pretty old Cash Box somewhere between my things and wanted to make it functional for maybe a bit spare change. I searched online for a tray that would fit it, but didnt find one. So i made this. The measurements of the tray are:
Single Version: 244mm x 139.8mm x 26mm)
Splitted Version: 244mmx139.8mmx 29mm)
Assemble:
Base-Tray (Only for small print beds, aka. the splitted Version): It can be pretty tough to assemble the left and right tray together, but when they are assembled it becomes pretty tough too. I used the back of the screw driver and gently hammered both in place.
Coin-Spacer: You dont need to glue them, me personally i glued them in place with hot glue just to make them not be removeable.
Print Settings:
| Filament | PETG |
| Nozzle | 0,4 |
| Layer | 0,2 |
| Walls | 3 |
| Infill | 15-20% |
| Support | Yes! They are needed for the tray itself left and right. I would recommend “on print bed only” and tree supports. |
| Brim | For the tray left and right i used a brim too, just to be on safe side. |
Like my work?
Please feel free to like, download and share your makes. Be happy to see them.
Fuel my creative engine with a Ko-fi! ☕ Your support on Ko-fi means the world to me. It allows me to dedicate more time to my projects and experiment with new ideas.
☕ - https://ko-fi.com/bitbyamy