Cash Box Tray (look Measurements)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cash Box Tray for old WEDO Model.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 19
- Makes
- 0
- Views
- 302
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Cash Tray for an old WEDO Cash box
I found this pretty old Cash Box somewhere between my things and wanted to make it functional for maybe a bit spare change. I searched online for a tray that would fit it, but didnt find one. So i made this. The measurements of the tray are:
Single Version: 244mm x 139.8mm x 26mm)
Splitted Version: 244mmx139.8mmx 29mm)
Assemble:
Base-Tray (Only for small print beds, aka. the splitted Version): It can be pretty tough to assemble the left and right tray together, but when they are assembled it becomes pretty tough too. I used the back of the screw driver and gently hammered both in place.
Coin-Spacer: You dont need to glue them, me personally i glued them in place with hot glue just to make them not be removeable.
Print Settings:
| Filament | PETG |
| Nozzle | 0,4 |
| Layer | 0,2 |
| Walls | 3 |
| Infill | 15-20% |
| Support | Yes! They are needed for the tray itself left and right. I would recommend “on print bed only” and tree supports. |
| Brim | For the tray left and right i used a brim too, just to be on safe side. |
Like my work?
Please feel free to like, download and share your makes. Be happy to see them.
Fuel my creative engine with a Ko-fi! ☕ Your support on Ko-fi means the world to me. It allows me to dedicate more time to my projects and experiment with new ideas.
☕ - https://ko-fi.com/bitbyamy