1 / 1
25mm Clothing Rail Mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Perfect wall mount to hold up a 25mm clothing rail.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 33
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Perfect Holder for a 25mm Clothing Rail
I designed a holder specifically for a 25mm clothing rail, and it works perfectly. Here are the details:
Design Features
- The hook is slightly smaller than the rail's diameter, allowing the rail to clip in place securely rather than sitting loosely.
- It may also work for slightly smaller rails, though the tolerances might be a bit off.
Printing Specifications
- Material: PLA.
- Infill: Printed with 100% infill since PETG wasn’t available for this print.
Installation
- Secured with three screws for extra stability (possibly overkill for such a simple item, but it’s very secure).
Feel free to reach out if you need any additional information!