1 / 5
23 GA Pin Nail Containers (Print in Place) — zdjęcie 1
1 / 5

23 GA Pin Nail Containers (Print in Place)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Print in Place containers for 23 GA pneumatic pin nails in various sizes

Ocena
0 / 5
Polubienia
8
Pobrania
19
Wydruki
0
Wyświetlenia
168
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Print in place containers for 23 GA pneumatic pin nails in various sizes. Should fit most brands.

Sizes provided: ¾" (19mm), 1" (25mm), 1-¼" (32mm). 

Each box fits around 4,000 nails.

Models are print in place - place them lid side down and the container upright. It should lift right off the bed and work immediately!

Each lid has a snap in closure, when opening the walls flex slightly outward allowing the latch to be released. The latches are beefy and should outlast this application.

I printed mine in PETG (recommended, do not use PLA) and 3 perimeters, using a .4 nozzle and .20mm layer height.

0.6 nozzle may or may not work due to some smaller details.

My Prusa Mini has terrible issues with seams in recent firmware, but even it managed to print this really well, but do watch the seam placement around the moving parts and consider your print speed to get the best quality.

Tagi