1 / 5
23 GA Pin Nail Containers (Print in Place) — image 1
1 / 5

23 GA Pin Nail Containers (Print in Place)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Print in Place containers for 23 GA pneumatic pin nails in various sizes

Rating
0 / 5
Likes
8
Downloads
19
Makes
0
Views
168
Reviews
0

Updated at source:

Model information

Category
Organizers
License
Creative Commons — Attribution — Noncommercial — Share Alike

Print in place containers for 23 GA pneumatic pin nails in various sizes. Should fit most brands.

Sizes provided: ¾" (19mm), 1" (25mm), 1-¼" (32mm). 

Each box fits around 4,000 nails.

Models are print in place - place them lid side down and the container upright. It should lift right off the bed and work immediately!

Each lid has a snap in closure, when opening the walls flex slightly outward allowing the latch to be released. The latches are beefy and should outlast this application.

I printed mine in PETG (recommended, do not use PLA) and 3 perimeters, using a .4 nozzle and .20mm layer height.

0.6 nozzle may or may not work due to some smaller details.

My Prusa Mini has terrible issues with seams in recent firmware, but even it managed to print this really well, but do watch the seam placement around the moving parts and consider your print speed to get the best quality.

Tags