Counting matching models…
Removed the SD card slots for 12x more MicroSD card slots. Only the 0.4mm tolerance non-stackable version remixed. This is a remix of nerdpersonthing's Hinged SD / microSD Card box ( Printables ), which is in turn a remix of fugalster's…
Also some armour scales because why not. print top and bottom, 4 each of the arm pieces, 4 mounts and 8 pins. All parts aren't oriented well as is.
Give a clean look to your fashion with a hinged-cover over your sewn buttons. These octagonal buttons have a print-in-place hinge & snap-clasp to cover the threads. In addition to your choice of colors, the look can be changed based on…
I recommend downloading the .3mf file as it already has all the settings in it, including the modifier for the logo. Settings: Layer height: 0.2mm (STRUCTURAL) Perimeters: 8 Top Solid layers: 0 Bottom Solid layers: 0 Infill: 15% Fill…
FlashForge Creator Pro - SD Card Cover keep junk from getting in the hole Add another file (before slicing) and position it above the card cover file for a different look! Do not print FFCP-SD_cc_assy.stl as it is only for assembly…
This will allow you to mount the MTC10 on an AMPS mount (screws down from the device side) It also has a hinge to allow for proper tilting. You will also need: 4 pcs M3x12 screws 4 pcs M3 washer 4 pcs M3 spring washer (grover) 1 pcs M4…
I raised the height to allow the filament tube to be outside the chain, this allows the tube to be less crunched.
I recommend downloading the .3mf file as it already has all the settings in it, including the modifier for the logo. Settings: Layer height: 0.2mm (STRUCTURAL) Perimeters: 8 Top Solid layers: 0 Bottom Solid layers: 0 Infill: 15% Fill…
This is a wallmount for a lamp we built from an old wine warrel. The hinge is needed to mount it to the wall. The hinge takes a 5mm bolt or insertion-screw. There are different versions which allow for different configuration angles
To maximize the contention of any eventual fumes I added a foam seal as a gasket in my enclosure (lid after installation had an approximately 5mm tall clearance) This version of the lock is 4mm taller, with an (optional) 3mm washer to…
Works above 50% scale. Any smaller and it just breaks or tolerances won't work. Follow goofball52 to receive notifications on what I've published, what was recently updated, and what is releasing soon.
designed these so i could quickly setup and take down pool noodle style gates for practice and they work great. for stacking gates, they are designed with time, cost and durability in mind i use 2' long 1/2" rebar and in the middle i take…
Overview I had some height constraints above my printer so the hinged version of https://www.printables.com/model/1226383-prusa-core-one-magnetic-top-cover-with-integrated did not quite suit my needs and I also wanted the functionality of…
Masterful Dungeons Door is designed as part of the Masterful Dungeons modular dungeon system. This is a functional door featuring a working hinge, allowing it to open and close during play. The hinge is assembled using a short piece of…
I didn't want to have to move my cover backwards to vent as I don't have the space behind my printer, so I've designed a hinged replacement insert that raises the storage box up around 12mm instead. They should slot straight into the…
This round box is made of three separate parts: – the box body – the lid – a hinge pin (two versions included: 2 mm and 3 mm) The hinge system allows you to adjust the fit depending on your printer’s tolerance. The 2 mm pin provides a…
using open scad you can personalize the size of the box and add vertical or horizontal separators easily. To be able to modify the openscad file, you need BOSL2, get it here:…
Enjoy this magical door to fairy world. Print in different colour combinations for maximum effect. Choose your decorations and stick them on. No supports needed. AMS can be used to get two-tone door handle and decorations if you have it.…
As an ol' guy, I needed more light to see into the dark cavern of the K1C. I first built Joe Coopers excellent hinged lid to get access for filament changes. When I started to figure out where to put more light strips, I realized the only…
Practical storage box designed for everyday use with a smooth hinged lid. The model is optimized for clean, support-free 3D printing and works reliably on most printers. Perfect for organizing small items such as screws, SD cards, cables,…
Originally designed for the Valentine's Day contest, but I missed the deadline by an hour. Files include the version in the preview and a blank version. You can leave the front side blank or cut and paste photos of you and your partner.
Decorative set to your bathroom: toothbrush and toothpaste holder or pen holder / organizer (diameter 8 cm, high 9,2 cm) large oval organizer / box with hinged lid (body and lid is printed separately and then completed with a snap) (20 x…
nice cable clamp with two connection points, one acts as a hinge. simpler than print in place
This is a fully print-in-place hinged mold with a detachable piston already assembled inside the box. No supports required when printed with the included 3MF profiles. (please read about the settings at the very end of the description)…
Here I'm showing off the result of my thesis which confirms the feasibility of fabricating compliant mechanisms that flex vertically with multi-material FDM 3D printing. This print is intended to be printed on multi-material printers like…
This box will hold 66 amiibo coins, closes nicely, seems very tough. I have also used this to hold quarters.
A unique 3D printable creation — this Articulated Turtle, Print in Place, Dome Shell, Hinged Legs, Flexible Head and Tail Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File -…
A unique 3D printable creation — this Hinged Treasure Chest Box For Dice Storage, Ornate Metal Look, Holds 2 Dice Sets Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File -…
A unique 3D printable creation — this Hinged Treasure Chest Box For Dice Storage, Ornate Metal Look, Holds 2 Dice Sets Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File -…
A unique 3D printable creation — this Medieval Wooden Dungeon Door With Stone Frame, Hinged Opening, Fits 1 Inch Grid Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File - Print…
A unique 3D printable creation — this Medieval Wooden Dungeon Door With Stone Frame, Hinged Opening, Fits 1 Inch Grid Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File - Print…
I designed this after downloading a couple designs that I just didn't really like. I had one Scentbird case on hand, so modeled my own version. My wife likes it much better, and has multiple Scentbird vials using this case in various silk…
My first shared model. Designed in Sketchup, printed on Elegoo Centauri Carbon. This box was a quick design to allow for the storage of up to 6 watches. Printing works best with supports under the hinges, but they are small enough to work…
A slightly bigger adapted insert for Cyberdyne's Topcover that hinges in place instead to vent the cover. The inserts are print-in-place, with no supports needed, there is a very small supports in the hinge, so the first time you rotate…
Case to house an Anex Offset Driver, 1/2 drive adapter, 1/4 drive adapter, screwdriver bit adapter, short body bit adapter, and a small prybar. This is a great tool, but couldn't find a case that held it and all the assorted pieces parts.…
This is a two-piece case for the Radview Detection Alphahound. The bottom piece acts as a dust cover and protects the delicate mylar when closed, and then swings out of the way to expose the sensor when you need to take a measurement. The…
Printable model of a GBA SP volume slider. Made slightly wider and taller to completely cover volume slider hole in Boxy Pixel GBA SP Hinged. Modified from original model just using tools in PrusaSlicer.
This compact print-in-place box is designed for a clean and reliable 3D printing experience — no assembly required . The hinged lid is fully integrated and works right off the printer thanks to a precise joint and satisfying snap-fit…
I found the original mold and thought it was a great idea. I didn't like the blank back, so I mirrored the design side and joined the two with a hinge. I printed this without supports and at 0.1 layer hieght. It worked perfectly right of…
This container was made to be a flushed-fit for the [BAIMEI IcyMe] Gua Sha & Jade Roller Set . More specifically, the container will hold the original foam mold which houses the set. This will provide a much sturdier & water-proof…
Another version of customizable lockable box with hinges. Most of customizable boxes are here done in OpenSCAD. For those who prefer direct building models in 3D instead of writing a source code, this is a version in done in Fusion360.…
25/02/2026 - It's been 4 years, but I've finally removed the rogue part from the underside of the model and updated the page. Apologies to anyone affected. Upgraded version of my original water reservoir cover for the Gaggia Classic Pro .…
I was looking for fidget toys to print, when I came across this one: https://www.thingiverse.com/thing:2667803 Star hinge fidget toy by chkno. I downloaded the 8-pointed start and printed it out. But it was fused together, and breaking it…
Also some armour scales because why not. print top and bottom, 4 each of the arm pieces, 4 mounts and 8 pins. All parts aren't oriented well as is.
The ball Buddy pro model requires a multi-filament printer for the living flex hinge. A fun ball marking tool that allows for interchangeable stencils. Consists of two ball holder halves connected with a flex hinge (requires a flex…
Remix of the rivet to allow the lid to close on the top 8 corner rivets 0.20mm PETG https://buymeacoffee.com/warp10
Used openscad to create the design. You can change the code for other sizes of the compartments. Hinge works by inserting a tiny piece of filament and then glue or melt into place. The transparent part of the lid is with acrylic glass /…
I liked DDM Juniors idea of the print-in-place hinge, but i want to re-use the screws of the original spool holder. So i combined it with the holder by OrzOrzOrz. After printing this version (model file “..bottom-hinge”), i thought it…
I chose to print this lure standing upright because the details look better in that configuration. In order to loosen the hinge I had to move it open and close several times and pick out support material but eventually it does loosen up…
A box/holder for your SD cards! It holds up to 12 microSD cards and 3 full-size SD cards. It also has an integrated lid connected via a print-in-place linkage, which latches securely shut to ensure your SD cards won't fall out on the go.…
This will allow you to mount the MTC10 on an AMPS mount (screws down from the device side) It also has a hinge to allow for proper tilting. You will also need: 4 pcs M3x12 screws 4 pcs M3 washer 4 pcs M3 spring washer (grover) 1 pcs M4…
I raised the height to allow the filament tube to be outside the chain, this allows the tube to be less crunched.
This is a remix of the Storage box from Merkli: https://www.thingiverse.com/thing:2873578 which I really liked. The latching mechanism is solid and closes securely while it is easy to open. I asked him to shrink one of the sizes by 50% so…
Removed the micro SD card slots for 3x more full-sized SD card slots. Only the 0.4mm tolerance non-stackable version remixed. This is a remix of nerdpersonthing's Hinged SD / microSD Card box ( Printables ), which is in turn a remix of…
Combination of the Hinged Calibration Cube from agepbiz and the Lego Calibration Cube from EnginEli I wanted to print both, so why not at the same time? Partially filled the bottom hole, but added a 3mm (non clearanced) hole in the Lego…
I've improved the original to make it close properly so there won't be a gap when closed.
The model in the pictures is printed on a 0.8 nozzle and 0.25 layer height and 1mm layer width in PLA. But the model should work with the normal 0.4mm or 0.6mm nozzles as well. Just slice for your printer. You can use 0.25mm layer height…
PLEASE APPROACH NEXT STEP CAUTIOUSLY To place the pin into the hinge, cut a piece of filament about 2-3 inches. Heat up the hotend to 170 degrees. Cautiously, hold the filament and put it into contact with the hotend until it melts it…
Print this model first, to check if hinges are not fused. If hinges fuse - try reducing extrusion multiplier. Model fits on 210x210 build plate. I used PETG for it, but I think PLA is fine too. For printing place supports like this. Do…
Used to use a two-part Mould for making the Family's Recipe Herbed Butter Rolls which was a bit of a pain in the ass to work with as one half would wander of while the other was being prepared so here's a hinged Print in Place version for…
A very unhinged set of dice :) Printing recommendations: FDM printer with 0.4mm nozzle 0.15mm layer height Generic PLA Organic supports everywhere 15% infill No brim or skirt Recommend retracting when moving between objects if printing…
Hinged lid stand for Flashforge Adventurer 5M (AD5M) 3d printer. Works with manufacturers' DIY enclosure - just unscrew screws and screw them back with this stand. When stand is not needed, it just laying flat on the back side of a lid.…
This is an hinged pipe clamp . You can easily add stuff to it with a boolean. It is made for a 28mm pipe but I'm sure you can tweak the model easily. Lock system : M6 bolt with a minimum of 16mm length. A butterfly nut seems the way if…
Added hinges to base unit for a adjustable aim. There are a few "odd" printing defects from the STL convert but it doesn't effect the unit. Print fine for bolt holes to be in good form. Category: DIY
Additional hardware: 4x M3x12mm flatheaded screws 2x M3 threaded inserts
This is unofficial, not needed for a functional LowRider 4, and offers primarily cosmetic (aesthetic) benefit (for the most part; the “tie downs” do have some zip tie slots that could be used to help with wrangling wires, and the back…
Love Maelstorn hinge setup but didn't want to use the fake winch and wanted something a bit more consistent and scale than the mounting plate. Category: R/C Vehicles
I have remixed this corner of the raiser I'm using on my K1 Max to mount my ERCF filament motion sensor remix. There may be some inaccuracies in the hole placement, as I have only printed it once and have been using it since then. The…
This is an experiment i've been working on.. It is about combining flexible and non-flexible material in one print. Feel free to play around with it as well ;-) it has been designed in a way that the two materials are interlocking into…
Sometime, I need simple boxes with labels to keep stuffs organized. You can choose between 3 types of latches: - the original one - the buckle - magnets Two SVG/DXF files can be imported on the bottom and top faces of the box. The logos…
I designed these after going on vacation and realizing I had no way to close any of the quintillion snack bags we'd simultaneously opened. I've seen lots of chip clips out there, but none that came with a way to keep them tidy, which is…
Size: 190.6x147.5x37.2mm Update: Added a two-part lid, as suggested by @LuckyResistor . This makes the lid surface better looking and easier to print (no long bridges), but the two parts need to be glued together. The bottom part of the…
I made a tie with print in place hinges. I split it in 2, as I have a Prusa MK3S. On that printer it’s a tight fit for the bottom part. Especially because the tip tends to warp, so I needed to add a round modificatory. There are two pins…
I did another experiment with TPU/PLA Multi-Material printing. I changed the interface section in a way that over a configurable number of layers the 2 materials get kind of "woven" (per layer) to each other (see pic of interface…
Easy to print and great to display books, phones, tablets, pictures or other … If you’d like to support my work, leaving a ♡ like ♥ or even buying me a coffee ☕ goes a long way. I love creating and sharing my designs, but my Mk2.5s is…
Ein einfacher “print in place” Kabelkanal in verschienden Größen mit Schanier A simple "print in place" cable duct in various sizes with hinge
After using @Simbungu's awesome model https://www.printables.com/model/80817-breville-barista-express-single-dose-hopper for a while… I was having to be too careful when adding the beans, one or two would fall behind the machine affecting…
PRINT INSTRUCTIONS Prints as one part. Hinges should print correctly with default PrusaSlicer settings. After print completes carefully dry open the clip, this should slowly break lose the hinges. Front clip will close hard the first time…
remix of https://www.printables.com/model/920539-framework-laptop-expansion-card-hinged-case just enclosed the magnets
My own take on the typical bag clip. I've found that this length (~110mm) is the most useful for me. The pattern on the front and back means my wife appreciates them more.
Print Settings (Should be in 3mf project file): Material: PETG - PLA will stress fracture over time and PETG hinges more nicely Layer Ht: 0.3 mm Perimeters: 3 Top Solid Layers: 6 - Helps with waviness from the default 4, purely aesthetic…
These body mounts allow you to mount the Injora IR60 body on the Redcat Ascent 18 truck. The body hinges on the rear about 120°, allowing it to stay open by itself and have full access to the internals. The front magnetic latch uses two…
I've seen many controller-board mounts/adapters for fitting an SKR (or MKS) mainboard (four holes in the corners) into a Creality Ender printer. With all Enders, the screw holes are unique for Melzi boards. For mounting an SRK or MKS in…
Remix of https://www.printables.com/model/502729-print-in-place-hinged-cable-management-strip without watermarks.
My print settings: MK4 with MMU3 Prusament PETG Orange 0.2 mm layers, 0.4 mm nozzle 15% Gyroid infill, 3 perimeters Connecting tab and corresponding roof of the rectangular hole in the other mount were printed with snug supports Rails are…
Material: PLA+ Druckereinstellung: Layerhöhe 0,2 mm / Infill 15 % / Support partial Zusätzliches Material / additional material: Schrauben / screws: 2 / M4 x 50 mm 4 / M4 x 15 mm 6 / M4 x 12 mm Gewindeeinsatz / threaded insert 6 / M4 x…
I needed a box to house my Coffee Filters from Tik Tok Shop. So I designed one. Uses a filament hinge. Here's what you get with this Box-travanganza! Box Bottom - 78mm x 101mm x 52mm Coffee Lid - 78mm x 101mm x 43mm Short Lid - 78mm x…
This is a cover that I designed for the Elegoo Mars printers. I took heavy inspiration from the Saturn cover so I just decided to post it as a remix. Please tell me any issues you come across when making this so that I can make the…
Recommend to print with supports. You can use straightened paper clip or any other small piece of rigid wire as a pin for a hinge.
I don't recommend using support as it will most likely interfere with the hinge So it is ok to ignore any slicer warnings about support generation. There is modelled support that will hold the model with the axis of the hinge in the Z…
I remixed @aosilver solution for the lid and it was pinching the tubes when I opened the enclosure lid. Now fixed! It's a snug fit to the tubes do not slide. Now my MMU Buffer (leading to a Sunlu S4) feeds smoothly into the Enclosure. A…
Just practicing with Fusion 360 parametric design. - this box can be sized up or down as needed
Heart shaped hinged box prints in 2 parts, Filament is used for hinge pins Category: Decor
I used 2mm x 100mm rods for the hinge pins inserted at each end. I have found that 1.75mm filament works fine too but the lid may slide a bit.
This is a wallmount for a lamp we built from an old wine warrel. The hinge is needed to mount it to the wall. The hinge takes a 5mm bolt or insertion-screw. There are different versions which allow for different configuration angles
![Bag clamp [hinged, print in place]](https://media.printables.com/media/prints/105292/images/1053826_e7a5ac4a-64f8-479b-b231-845b38703a23/clipping.png)
![[unofficial] LowRider v4 DIY CNC, gantry back covers, hinged for opening, and can pop out and back in, plus "tie downs" for them, and an in-gantry Jackpot mount](https://media.printables.com/media/prints/1082723/images/8511977_a5e0de90-94c3-4d5d-bc49-49ef96756aa0_c23e00ce-a752-452e-ad76-fbb7a7535ca4/img_8848.jpeg)
![Print In Place Hinged Cable Management Strip [NO WATERMARK]](https://media.printables.com/media/prints/1144289/images/8634772_fcbf5c51-808d-4295-b6b0-48e53527aada_fa5e8c24-7ef4-4735-8fb7-cf130359599b/imageee.webp)
