Hinged Heart Print-in-Place Link Bracelet
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The heart links in this bracelet have their own heart shaped hinges, which pop nicely in a contrasting color.
- Rating
- 5 / 5
- Likes
- 131
- Downloads
- 447
- Makes
- 4
- Views
- 2,086
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Other Fashion Accessories
- License
- Creative Commons — Attribution
These models print in place without supports and should flex easily straight off the print bed. A little wiggling may be required to loosen the joints.
I printed mine at 0.1 mm layer height and 50% infill. You might be able to get away with lower infill, but it probably won't make much of a time difference. Change to a contrasting color filament at 3.8 mm to see the heart-shaped hinges “pop” visually. Makes a great Valentine's day accessory.
The different models have the following lengths (slightly less when the clasp is closed):
- 9 links: 182 mm/ 7.2"
- 10 links: 201 mm / 7.9"
- 11 links: 220 mm / 8.7 "
- 12 links: 239 mm / 9.4 "
I couldn't get the 12-link version to fit on the bed of my Prusa MINI+, but it will work with a bigger print bed, so the STL file is included. Enjoy, and have a wonderful Valentine's day!