Hinged Heart Print-in-Place Link Bracelet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The heart links in this bracelet have their own heart shaped hinges, which pop nicely in a contrasting color.
- Ocena
- 5 / 5
- Polubienia
- 131
- Pobrania
- 445
- Wydruki
- 4
- Wyświetlenia
- 2083
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution
These models print in place without supports and should flex easily straight off the print bed. A little wiggling may be required to loosen the joints.
I printed mine at 0.1 mm layer height and 50% infill. You might be able to get away with lower infill, but it probably won't make much of a time difference. Change to a contrasting color filament at 3.8 mm to see the heart-shaped hinges “pop” visually. Makes a great Valentine's day accessory.
The different models have the following lengths (slightly less when the clasp is closed):
- 9 links: 182 mm/ 7.2"
- 10 links: 201 mm / 7.9"
- 11 links: 220 mm / 8.7 "
- 12 links: 239 mm / 9.4 "
I couldn't get the 12-link version to fit on the bed of my Prusa MINI+, but it will work with a bigger print bed, so the STL file is included. Enjoy, and have a wonderful Valentine's day!