Hinged lid for adding MMU2S to Original Prusa Enclosure
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Printable accessory, providing access to the printer and MMU from the top. Designed for the Original Prusa Enclosure.
- Rating
- 4.801 / 5
- Likes
- 1,063
- Downloads
- 10,227
- Makes
- 245
- Views
- 33,596
- Reviews
- 206
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- GNU General Public License v3.0
Printable accessory for Original Prusa Enclosure developed to enable access from the top. Can be used for a standalone printer or for a printer with a multi-material unit on the frame.
Check the step-by-step guide on how to install the Hinged lid.
In case you want to use the Hinged Lid without the MMU you can use Hinged-Lid-Complete_0.3mm_PETG_MK3S_5h58m.gcode or you can turn off MMU-grommet in the 3mf file
In case you want to use the Hinged Lid with Advanced Filtration System you need to print Hinge-bracket-Rt instead of Hinge-bracket-R
To mount the Hinged lid you will need the following fasteners*:
- M3x8 screw (15x)
- M3nS nut (1x)
- M3 nut (8x)
- Pin 3x20 (2x)
* The package of the Original Prusa Enclosure includes extra fasteners, which were added in case you wanted to install the Hinged Lid.
Print instructions
You have three options:
- use the pre-sliced G-code and print it on your MK3S+
- use .3mf file for accurate setting of perimeters and supports
- download the latest PrusaSlicer and use the following settings**:
- print settings: 0.30mm DRAFT
- filament: PETG (tested on Prusament)
- 20% grid infill
- minimum of 8 perimeters
- turn on thin wall detection
** Note that this setting is the minimum possible due to the strength of the parts, but you can experiment with your own settings.