Hinged lid for adding MMU2S to Original Prusa Enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Printable accessory, providing access to the printer and MMU from the top. Designed for the Original Prusa Enclosure.
- Ocena
- 4,801 / 5
- Polubienia
- 1062
- Pobrania
- 10 222
- Wydruki
- 245
- Wyświetlenia
- 33 573
- Oceny
- 206
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- GNU General Public License v3.0
Printable accessory for Original Prusa Enclosure developed to enable access from the top. Can be used for a standalone printer or for a printer with a multi-material unit on the frame.
Check the step-by-step guide on how to install the Hinged lid.
In case you want to use the Hinged Lid without the MMU you can use Hinged-Lid-Complete_0.3mm_PETG_MK3S_5h58m.gcode or you can turn off MMU-grommet in the 3mf file
In case you want to use the Hinged Lid with Advanced Filtration System you need to print Hinge-bracket-Rt instead of Hinge-bracket-R
To mount the Hinged lid you will need the following fasteners*:
- M3x8 screw (15x)
- M3nS nut (1x)
- M3 nut (8x)
- Pin 3x20 (2x)
* The package of the Original Prusa Enclosure includes extra fasteners, which were added in case you wanted to install the Hinged Lid.
Print instructions
You have three options:
- use the pre-sliced G-code and print it on your MK3S+
- use .3mf file for accurate setting of perimeters and supports
- download the latest PrusaSlicer and use the following settings**:
- print settings: 0.30mm DRAFT
- filament: PETG (tested on Prusament)
- 20% grid infill
- minimum of 8 perimeters
- turn on thin wall detection
** Note that this setting is the minimum possible due to the strength of the parts, but you can experiment with your own settings.