Print-in-place Hinged Dice Vault (Magnetic)
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€7.25 – €8.86 net (excluding VAT)
For file: DiceVault_0.2mm_PLA_MK3S_8h11m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €8.06 excluding VAT (range midpoint).
- Weight reported by the author
- 98 g
- Print time reported by the author
- 8.19 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A hinged dice vault with a magnetic closure that can accommodate 7 dice up to 24mm tall.
- Rating
- 4.857 / 5
- Likes
- 329
- Downloads
- 803
- Makes
- 7
- Views
- 5,734
- Reviews
- 7
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Attribution — Noncommercial
Hinged Dice Vault With Magnets
Parts List
- 10mm x 3mm neodymium disc magnets
- CA glue
- 7 piece dice set
Instructions
Print with 2 walls, 15% infill of your choice, and no supports. Insert a pause on the layer that the magnet holes are covered to insert the magnets. Be sure to get the polarity correct and drop a dot of CA glue on the back of the magnets to hold them in place.