fischertechnik small push button switch
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small off/on or pole-reversing switch for the fischertechnik construction toy system. Uses a 8x8 mm push-button…
- Ocena
- 5 / 5
- Polubienia
- 22
- Pobrania
- 157
- Wydruki
- 1
- Wyświetlenia
- 1364
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A small off/on or pole-reversing switch for the fischertechnik construction toy system. Uses a 8x8 mm push-button switch found as a no name item on ebay, I assume it's a K8-8081D-L1 from Korean manufacturer HRO.
The off/on version needs no soldering. Simply cut off the middle contacts, bend the remaining four contacts completely flat and insert the switch into the base part, securing it with the sleeve part and, if needed, a drop of super glue.
The pole-reversing version needs a bit of soldering, use the image provided as a guide. Watch out for the correct orientation when soldering, it only works in one way. For correct wiring, use two jacks diagonally opposite of each other as input and the remaining two as output.
Please consider leaving a "like" or posting your make as a token of appreciation for my work.
Find my other fischertechnik designs here.
https://youtu.be/5TDJeOXbut4
https://youtu.be/hU7KIjeh6Fw
keywords: fischertechnik pole-reversing Polwendeschalter push_button switch
Print Settings
Printer Brand:
Anet
Printer:
A8
No
Supports:
No
.1 mm
Infill:
20%
Filament:
any PETG or PLA any
Category: Construction Toys