1 / 9
fischertechnik 6V 1W solar power module 60x120 mm — zdjęcie 1
1 / 9

fischertechnik 6V 1W solar power module 60x120 mm

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The fischertechnik solar power modules like this one (2V x 200mA = 0.4W) are often too weak under non-ideal conditions…

Ocena
0 / 5
Polubienia
4
Pobrania
31
Wydruki
0
Wyświetlenia
310
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Building Toys
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

The fischertechnik solar power modules like this one (2V x 200mA = 0.4W) are often too weak under non-ideal conditions to do anything meaningful with them. This is an alternative more powerful 1W module (6V x 166mA). You can easily chain several of them to increase power to the needed level.

It uses a 60x110x2.5 mm solar module which you can get from ebay international shops for small money. You'll need a couple of male and female pin headers in addition to the printed part (see images).

To get more power, you can chain two adjacent modules with a simple two-pin 15mm male header (push the plastic part to a middle position) or a male-male dupont cable. If you use a cable, be sure to watch out for correct polarity.

Please consider leaving a "like" or posting your make as a token of appreciation for my work.

Find my other fischertechnik designs here.

Print Settings

Printer Brand:

Anet

Printer:

A8

Rafts:

No

Supports:

Yes

Resolution:

.15 mm

Infill:

10 %


Filament:

PRI-MAT 3D (from ebay) PLA Yellow Green - RAL 6018

Category: Construction Toys

Tagi