fischertechnik 6V 1W solar power module 60x120 mm
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The fischertechnik solar power modules like this one (2V x 200mA = 0.4W) are often too weak under non-ideal conditions…
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 31
- Makes
- 0
- Views
- 310
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Building Toys
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The fischertechnik solar power modules like this one (2V x 200mA = 0.4W) are often too weak under non-ideal conditions to do anything meaningful with them. This is an alternative more powerful 1W module (6V x 166mA). You can easily chain several of them to increase power to the needed level.
It uses a 60x110x2.5 mm solar module which you can get from ebay international shops for small money. You'll need a couple of male and female pin headers in addition to the printed part (see images).
To get more power, you can chain two adjacent modules with a simple two-pin 15mm male header (push the plastic part to a middle position) or a male-male dupont cable. If you use a cable, be sure to watch out for correct polarity.
Please consider leaving a "like" or posting your make as a token of appreciation for my work.
Find my other fischertechnik designs here.
Print Settings
Printer Brand:
Anet
Printer:
A8
No
Supports:
Yes
.15 mm
Infill:
10 %
Filament:
PRI-MAT 3D (from ebay) PLA Yellow Green - RAL 6018
Category: Construction Toys