1 / 4
iMac 5k Switch Panel Holder for External Display
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Custom holder for iMac 5k's repurposed as external displays. Frustrated with unsafe solutions for securing the panel
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 220
- Wydruki
- 0
- Wyświetlenia
- 1126
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (21)Powiązane
This holder is designed for converting a 5k iMac into an external display by securely mounting the monitor control buttons, which can be accessed through the RAM compartment. It provides a robust and easily operable solution while maintaining the sleek, modern aesthetic of the iMac.
Installation Guide:
- Prepare the Holder:
- Solder M3 Ruthex threaded inserts into the designated holes on the holder to provide a secure threading for the screws.
- Attach the Control Board:
- Place the control board onto the holder and secure it using M3 screws into the prepared threaded inserts. Ensure the board is tightly fixed but avoid over-tightening.
- Mount the Holder:
- Align the holder with the iMac’s existing screw threads and attach it using appropriate screws to ensure it is firmly mounted.
- Route the Flat Cable:
- Position the flat ribbon cable either under or behind the holder, taking care to avoid any pinching. Ensure the cable is flat and securely positioned.
- Testing:
- Test the control buttons through the RAM compartment to verify functionality. Adjust as needed for optimal performance.
This installation not only facilitates the use of a 5k iMac as an external display but also integrates cleanly with the original design, requiring minimal modifications.