1 / 4
iMac 5k Switch Panel Holder for External Display
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Custom holder for iMac 5k's repurposed as external displays. Frustrated with unsafe solutions for securing the panel
- Rating
- 5 / 5
- Likes
- 14
- Downloads
- 220
- Makes
- 0
- Views
- 1,126
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
This holder is designed for converting a 5k iMac into an external display by securely mounting the monitor control buttons, which can be accessed through the RAM compartment. It provides a robust and easily operable solution while maintaining the sleek, modern aesthetic of the iMac.
Installation Guide:
- Prepare the Holder:
- Solder M3 Ruthex threaded inserts into the designated holes on the holder to provide a secure threading for the screws.
- Attach the Control Board:
- Place the control board onto the holder and secure it using M3 screws into the prepared threaded inserts. Ensure the board is tightly fixed but avoid over-tightening.
- Mount the Holder:
- Align the holder with the iMac’s existing screw threads and attach it using appropriate screws to ensure it is firmly mounted.
- Route the Flat Cable:
- Position the flat ribbon cable either under or behind the holder, taking care to avoid any pinching. Ensure the cable is flat and securely positioned.
- Testing:
- Test the control buttons through the RAM compartment to verify functionality. Adjust as needed for optimal performance.
This installation not only facilitates the use of a 5k iMac as an external display but also integrates cleanly with the original design, requiring minimal modifications.