K200 K280 Effector E3D V6 mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My Take on a clamp for the E3D V6 hotend on a standard He3D K200/K280 effector plate.This is designed for a 1/8"…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 69
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
My Take on a clamp for the E3D V6 hotend on a standard He3D K200/K280 effector plate.
This is designed for a 1/8" thread Bowden coupler (Like this: https://e3d-online.com/threaded-bowden-coupling) mounted in the upper part.
- You could ignore this and use the inbuilt bowden coupler in the V6 heatsink, it's just less convenient when you need to release it.
I used four M3x16 hex bolts to mount, they simply screw into the lower piece and self-tap; this is plenty strong but does need a re-tighten after a few prints.
The loomholder version is pretty self-explanatory, it stops everything flapping too badly. There are slots for cable ties, I have some releasable ties I use in this.
Category: 3D Printer Parts