K200 K280 Effector E3D V6 mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
My Take on a clamp for the E3D V6 hotend on a standard He3D K200/K280 effector plate.This is designed for a 1/8"…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 10
- Makes
- 0
- Views
- 69
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
My Take on a clamp for the E3D V6 hotend on a standard He3D K200/K280 effector plate.
This is designed for a 1/8" thread Bowden coupler (Like this: https://e3d-online.com/threaded-bowden-coupling) mounted in the upper part.
- You could ignore this and use the inbuilt bowden coupler in the V6 heatsink, it's just less convenient when you need to release it.
I used four M3x16 hex bolts to mount, they simply screw into the lower piece and self-tap; this is plenty strong but does need a re-tighten after a few prints.
The loomholder version is pretty self-explanatory, it stops everything flapping too badly. There are slots for cable ties, I have some releasable ties I use in this.
Category: 3D Printer Parts