1 / 6
Accurate model of E3d V6 (1.75mm) heatsink and nozzle assembly for fitting — zdjęcie 1
1 / 6

Accurate model of E3d V6 (1.75mm) heatsink and nozzle assembly for fitting

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Accurate E3d V6 1.75mm assembly model for fitting and design use.I was a bit unhappy with the other models I'd found,…

Ocena
0 / 5
Polubienia
1
Pobrania
36
Wydruki
0
Wyświetlenia
98
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Accurate E3d V6 1.75mm assembly model for fitting and design use.

I was a bit unhappy with the other models I'd found, they were for the 3mm version with a bigger mount size. I wanted one I could trust with the 1.75 mount.

Dimensions on this model are taken from the diagrams made available at: https://e3d-online.dozuki.com/c/V6_Drawings. I have ensured the external dimensions are all correct, some internal ones are not reproduced and the de-burring/chamfers are omitted (eg. on heatbreak/nozzle/inlet)

In order to use these with the official e3d duct you can use the following scad fragment to get the dimensions; this is also in the attached scad file:

// Alternate dimensions are for inverted mount..

// A 30mm heatsink fan, 10mm deep// https://www.thingiverse.com/thing:2654973

translate([-15,-25.6,-12.7]) // or [-15,-25.6,-16.7]

rotate([-90,0,0])import("../Parts/30mm_Fan.stl");

// The Genuine e3d duct (TM) https://www.thingiverse.com/thing:340312

translate([0,0,-42.7]) // or [0,0,-16.7]

rotate([90,0,90]) // or [-90,0,90]

import("../Parts/V6.6_Duct.stl");

 

 

Category: 3D Printers

Tagi