Accurate model of E3d V6 (1.75mm) heatsink and nozzle assembly for fitting
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Accurate E3d V6 1.75mm assembly model for fitting and design use.I was a bit unhappy with the other models I'd found,…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 36
- Makes
- 0
- Views
- 98
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Accurate E3d V6 1.75mm assembly model for fitting and design use.
I was a bit unhappy with the other models I'd found, they were for the 3mm version with a bigger mount size. I wanted one I could trust with the 1.75 mount.
Dimensions on this model are taken from the diagrams made available at: https://e3d-online.dozuki.com/c/V6_Drawings. I have ensured the external dimensions are all correct, some internal ones are not reproduced and the de-burring/chamfers are omitted (eg. on heatbreak/nozzle/inlet)
In order to use these with the official e3d duct you can use the following scad fragment to get the dimensions; this is also in the attached scad file:
// Alternate dimensions are for inverted mount..
// A 30mm heatsink fan, 10mm deep// https://www.thingiverse.com/thing:2654973
translate([-15,-25.6,-12.7]) // or [-15,-25.6,-16.7]
rotate([-90,0,0])import("../Parts/30mm_Fan.stl");
// The Genuine e3d duct (TM) https://www.thingiverse.com/thing:340312
translate([0,0,-42.7]) // or [0,0,-16.7]
rotate([90,0,90]) // or [-90,0,90]
import("../Parts/V6.6_Duct.stl");
Category: 3D Printers
