1 / 3
KaliKooler (50mm fan adapter for Juwel Rekord 800 aquariums) — zdjęcie 1
1 / 3

KaliKooler (50mm fan adapter for Juwel Rekord 800 aquariums)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This was created for Kali, who is 15+ years old, happy in her safe domain, but lives in an aquarium prone to…

Ocena
0 / 5
Polubienia
0
Pobrania
6
Wydruki
0
Wyświetlenia
87
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Pets
Licencja
Creative Commons — Attribution — Noncommercial

This was created for Kali, who is 15+ years old, happy in her safe domain, but lives in an aquarium prone to overheating on Amsterdam's occasional 25+c days.

It allows a 50mm 12v fan to be mounted on the feeding hatch hole of a Juwel Rekord 800 (100l) aquarium. Use a normal 50mm 5/10/12/24v PC fan, Don't be a dick and use a high voltage or pressure fan.

The fan is mounted on a velocity stack sourced from here: https://www.thingiverse.com/thing:441251

  • I simply scaled the provided STL by 125% and it worked fine, ymmv, that design also has a scad+dxf to play with.
  • I then glued it all together, there is a 12v wall-wart adapter in the tanks power bar that runs this.
  • It is quietest without any sort of intake guard, but this tank is on public display so I added a simple guard and we ignore the slight whine, or attribute it to tourists.

This design might well fit other similar/clone aquariums, fits in a 136x120 gap, with a 114x54 food hole offset 17mm towards the front.

The scad file parameterizes these values if you want to adapt for other models, it uses a fancy font for the text which you can either drop (to the default font, or entirely) or look at the comments to install the font I used, or any font from the same source you fancy.

Print Settings

Printer:

K280

Rafts:

No

**Supports:**

No

Resolution:

0.2

**Infill:**

10%


Notes:

Total 'mare to print..
The airholes caused such a storm of retracts that my extruder exploded on the 4th layer..

  • Ok, sorta exaggeration, the extruder was suffering anyway, this print was the final deathstroke, the bowden adapter failed irreparably.
  • Once I'd got a new extruder (E3d Titan, seems pretty good) it printed fine, but was slow for such an apparently simple object.

Category: Pets

Tagi