1 / 3
KaliKooler (50mm fan adapter for Juwel Rekord 800 aquariums) — image 1
1 / 3

KaliKooler (50mm fan adapter for Juwel Rekord 800 aquariums)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This was created for Kali, who is 15+ years old, happy in her safe domain, but lives in an aquarium prone to…

Rating
0 / 5
Likes
0
Downloads
6
Makes
0
Views
87
Reviews
0

Updated at source:

Model information

Category
Pets
License
Creative Commons — Attribution — Noncommercial

This was created for Kali, who is 15+ years old, happy in her safe domain, but lives in an aquarium prone to overheating on Amsterdam's occasional 25+c days.

It allows a 50mm 12v fan to be mounted on the feeding hatch hole of a Juwel Rekord 800 (100l) aquarium. Use a normal 50mm 5/10/12/24v PC fan, Don't be a dick and use a high voltage or pressure fan.

The fan is mounted on a velocity stack sourced from here: https://www.thingiverse.com/thing:441251

  • I simply scaled the provided STL by 125% and it worked fine, ymmv, that design also has a scad+dxf to play with.
  • I then glued it all together, there is a 12v wall-wart adapter in the tanks power bar that runs this.
  • It is quietest without any sort of intake guard, but this tank is on public display so I added a simple guard and we ignore the slight whine, or attribute it to tourists.

This design might well fit other similar/clone aquariums, fits in a 136x120 gap, with a 114x54 food hole offset 17mm towards the front.

The scad file parameterizes these values if you want to adapt for other models, it uses a fancy font for the text which you can either drop (to the default font, or entirely) or look at the comments to install the font I used, or any font from the same source you fancy.

Print Settings

Printer:

K280

Rafts:

No

**Supports:**

No

Resolution:

0.2

**Infill:**

10%


Notes:

Total 'mare to print..
The airholes caused such a storm of retracts that my extruder exploded on the 4th layer..

  • Ok, sorta exaggeration, the extruder was suffering anyway, this print was the final deathstroke, the bowden adapter failed irreparably.
  • Once I'd got a new extruder (E3d Titan, seems pretty good) it printed fine, but was slow for such an apparently simple object.

Category: Pets

Tags