1 / 8
1610 bed lift plates for underbody sliders and better ER11 clearance — zdjęcie 1
1 / 8

1610 bed lift plates for underbody sliders and better ER11 clearance

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Combined with some 50mm tall feet (like this: https://www.thingiverse.com/thing:2250758) these blocks allow the 1610 Y…

Ocena
0 / 5
Polubienia
1
Pobrania
6
Wydruki
0
Wyświetlenia
58
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution

Combined with some 50mm tall feet (like this: https://www.thingiverse.com/thing:2250758) these blocks allow the 1610 Y axis rods to be re-mounted below the frame rail. and the bed brought back up to a sensible height. Perfect if you are having trouble getting work underneath an ER11 chuck etc.

This, of course, reduces overall rigidity a bit, but it does not seem significant on a humble machine like this.

The 80mm versions allow you to run the bed slightly over the front/rear frame rails for a grand total of 120mm Y travel (eg; you get a 1612 CNC) at the expense of Y axis strength and stability. On my machine this has not had any appreciable difference to work quality, but the extra 20mm is really handy.

Category: Machine Tools

Tagi