1610 bed lift plates for underbody sliders and better ER11 clearance
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Combined with some 50mm tall feet (like this: https://www.thingiverse.com/thing:2250758) these blocks allow the 1610 Y…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 6
- Makes
- 0
- Views
- 58
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
Combined with some 50mm tall feet (like this: https://www.thingiverse.com/thing:2250758) these blocks allow the 1610 Y axis rods to be re-mounted below the frame rail. and the bed brought back up to a sensible height. Perfect if you are having trouble getting work underneath an ER11 chuck etc.
This, of course, reduces overall rigidity a bit, but it does not seem significant on a humble machine like this.
The 80mm versions allow you to run the bed slightly over the front/rear frame rails for a grand total of 120mm Y travel (eg; you get a 1612 CNC) at the expense of Y axis strength and stability. On my machine this has not had any appreciable difference to work quality, but the extra 20mm is really handy.
Category: Machine Tools
