Suzanne Key Chain (Blender Monkey)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted to have a Suzanne Key Chain (the monkey in Blender) as a tribute to this wonderfull piece of software :)
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 157
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution
I wanted to have a Suzanne Key Chain (the monkey in Blender) as a tribute to this wonderfull piece of software and the people who develop it.
This is about 4cm tall and is printed with a 0.1 mm layer height. I had some problem with the supports so I have to take some time to file this piece but at the end I am very pleased by the result. So just be aware that it might be tricky to remove the supports depending on the parameters you choose in your slicer. I would also recommend to increase the number of walls in order to increase the thoughness of the piece (here I have 4 walls, 0.4mm nozzle, with a 20% cubic infill and the keychain is quite sturdy).
I hope you'll enjoy it :)
I am doing my best to produce good looking and reliable designs so if you feel like it you can offer me some coffee by tipping me :)
Print Settings
Printer:
Alfawise u30
Rafts:
Yes
Yes
Resolution:
0.1 mm layer height
20% cubic infill
Filament: ERYONE PLA Grey
Category: Accessories