Wyniki wyszukiwania: blender

Ninja blender 2 Liter lid/cap

Our Ninja blender lid was broken so I modeled a new one

Hand Blender Wall Holder

This is a wall mount for Bosch hand blenders. Print from PETG for it to be strong enough to withstand kitchen use. If you would print this from PLA, the layer adhesion would cause it to fail. PETG does not have this problem.

Trail Map Generator | TrailPrint3D | Blender Addon

INTRODUCTION This is a Addon for Blender that allows you to create Miniature Maps of your adventures from just the GPX file that you can download from Komoot, strava, garmin or other tracking apps! No blender knowledge required SUPPORT MY…

Blender logo cookie cutter

Print with the handle part facing down.

Smoothie Blender Bottle Dishwasher Support

Tired of your large cups or blender bottle getting tossed about in the dishwasher - so was my wife. Made her this support to hold her smoothie blender container upright in the dishwasher. Works great for large cups and other containers…

Netta blender feet

I have a netta blender and unfortunately one of the feet on the bottom fell off so I took one of the pre existing ones and took some measurements and create this to take it's place.Hope this can help somebody. it can be printed out of…

A donut and a cup with coffee made in blender

make sure to not add to much infill around 10 percent since its a sculpture and make sure to add supports on overhangs on where its required (the G-code is provided) below as well as the 3mf file too.

Ninja Blender Peanut Butter Jar Adapter

I have a Ninja Professional 1100 watt (BL660) blender. It has single-serving cups with a small set of blades, apparently called "nutrininja" but not labelled as such on my unit.…

Blender Donut (no sprinkles) ;)

I just wanted to post something, but if anyone want to 3D print a donut without sprinkles.. well here you go :3

Spare button for an ETA hand blender

Printed from Prusa PC Blend. To disassemble the blender, you need to remove the speed control wheel (1).

Round container for makeup sponge or beauty blender, bathroom organization

A small little container for holding my extra beauty blender but it can of course be used to store anything

UM760 wall mount (blender)

Simple blender file for Minisforum UM760 wallmount Designed so that none of the air in/outlets of the minisforum are blocked Has the option to mount an accessory via a very simple dove tail on the side, included is an example for a…

Blender Dişli Kavrama Parçası - Blender Gear Coupling Part

Blender Dişli Kavrama Parçası. - Blender Gear Coupling Part. Denenmedi. - Not tested.

Sound Shield for Ninja Foodi Smoothie Blender

Simple adapter helps fit an Oxo food storage container as a sound shield on the Ninja Foodi blender. Interestingly the sound shield does not actually decrease volume (e.g. dB readings are the same before and after) but does significantly…

Blender with Banana

A blender that comes with a cap and a banana. The part of the blender that the fruits go in is thin, so I don't know if it will print correctly, but I tried to add some depth so it can print better.

Wood Grain Coasters using Blender Geometry Nodes | Bump STL Texturizer

Simple Wood Grain Coasters ~ Made with Blender Geometry Nodes I printed these with a wood PLA then sanded them and stained them with a mahogany stain before adding multiple coats of clearcoat. I then added rubber feet to make them feel…

Blender 3D Cursor

The 3D cursor in Blender is the red/white/black thing where new objects appear. You'll need to print 16 sections of the circle, 8 in white and 8 in red. You'll then need to superglue them together. Because there can be slight…

Coupling and mating part for the Scarlett SL 1543 Blender

Coupling and mating part for the Scarlett SL 1543 Blender

Silvercrest Blender Shaft

Introducing my 3D model for Silvercrest hand blender - it is a drive shaft connecting the main (hand) part with the lid of the herb blender dose ... original was made from metal, but the upper wings has broken and I created this one from…

Solac Compact Mixer Blender connector

for broken part replacement

Imetec D6401 Immersion Blender Locking Collar (Replacement Part)

This part is a replacement locking collar / coupling sleeve for the Imetec D6401 immersion blender. The original plastic part that connects the motor unit to the blending shaft is vulnerable to cracking or wearing out over time. Once it…

Container (Blender geometry nodes parametric model)

This Blender file features Geometry Nodes that allow you to create custom storage containers, such as trays and boxes with dividers, simply by inputting dimensions. It is designed for 3D printing. The file includes two types of…

Replacement Lid For Blentec Blender

This is a replacement lid designed for Blendtec blenders that use the standard rubber top. Its form creates a secure seal with the rubber, preventing food from escaping while blending, yet it remains easy to remove for cleaning. Note: If…

perimetrics for creality k1 lid riser by @BlenderBender

use in your slicer hole compensation 0.16mm and contour compensation -0.13

3D Desk Scene - Blender Project

3D scene created in Blender. The main composition was modeled by me, while the cup model was imported from an external source: https://sketchfab.com/3d-models/classic-red-coffee-mug-c89fa8b5390145488a28c41ec54ccc8d

Bosch MFQ36490 kitchen blender part

If a part of your Bosch MFQ36490 hand mixer blender has broken, this may come in handy. In my case, the coupling (connector) of the immersion blender attachment broke and no longer stayed secured in the mixer. To replace this part, follow…

Ninja Blender new base connector for the 2 liter pitcher

My New ninja blender got broken from the first use and while I am working on a replacement I modeled the broken part and we can make shake again. I recommend to print it with at least 2.4mm walls and ABS (since PLA cant handle heat

Blender Fidget Spinner

0.15 mm layer height. 5-15 % Infill. Use negative horizontal expansion for more range in flexible parts.

Suzanne (Blender Monkey) string

My first attempt at String Art Suzanne Monkey Blender suspended in strings artwork

Bosch MUM4 Blender adapter for Electrolux Assistent N8

Electrolux changed the bayonet and the rotational direction of the blender with the n21 model. Vintage blenders for the older machines are probably made from polycarbonate. I designed the blender adapter to avoid the whole polycarbonate…

WMF Kult X Mix & Go to BlenderBottle compatible adapter

Important to refine some settings in prusaslicer for good results. I printed with: 0.25mm Structural layer height PETG (food) 15% gyroid infill 4 Perimeters Nahtposition Nächste (I'm German and don't know about the English word sry for…

BenchTop Disc Sander / BOSCH blender CNSM10 / 12.5 cm disc sander

THIS IS NOT A TOY AND CAN BE DANGEROUS! This model is mostly supportless & can be built without taking the electronics apart (no need to de-solder electronics). UPDATE LIST & EXPERIENCE: So I tought that the motor was exclusively built by…

Vitamix Blender Replacement Foot (vm0103)

I needed a new foot for my blender. This one does the job. It fits in my model vm0103 blender just like the one I lost. I don't know if it is compatible with other Vitamix appliances. Print settings FIlament: TPU Supports: No Brim: No…

SOVOL / COMGROW Filament dryer Sharpie blender (colorizer) mount

I were really enjoyed coloring my prints with Sharpie markers using Color blender design by Devin Enrique ! So I made an mount for my Comgrow filament dryer box (Also released by brand SOVOL) that makes it possible to attach this sharpie…

Omega Boomerang in Blender and Sverchok

This omega boomerang is pretty similar to some of my previous designs. It was made differently, though – it uses the fantastic Sverchok plugin, which enables parametric modeling in Blender. Throw low and with a bit of layover. Should do a…

Blender Startup File for 3d Printing

The Blender Startup File for 3D Printing (startup.blend) is a pre-configured file optimized for 3D printing workflows. It is specifically set up for working with millimeters as the default unit, ensuring accurate scaling when exporting to…

Blender Donut Keychain

A keychain of the first model many 3D artists make due to the excellent donut tutorial by Andrew Price. -Print in two separate pieces on a single extruder printer for multicolor -Single mesh included for single color donut, or if you have…

Wall mountable Blender Bottle/lid holder

Wall mountable holder for blender bottles or lids, I printed two one taller to hold the bottles and one smaller for the lids. I think right now it's sized for roughly 6 bottles but can be scaled up or down a decent bit, will just make the…

coupling blender REDMOND RHB 2975

If your clutch has become unusable, print this one. The old clutch is simply tightened with pliers, the new one is pressed with blows of a rubber hammer. Printed from PLA in layers of 0.16. Infill 100%.

Ninja blender 2 Liter lid/cap

Our Ninja blender lid was broken so I modeled a new one

Adaptor for HB-105SA MAX 800W PHILADELPHIA Blender

This custom adaptor is specifically designed for the HB-105SA MAX 800W PHILADELPHIA blender, enhancing its mixing capabilities. It provides a precise fit and increased stability during use, making it ideal for those who want to upgrade…

BIJOUTERIE 3D by blender 4

this 3d model used by blender create panel for BIJOUTERIE with the source blender

starbucks stund 3d model by blender black color

starbucks stund 3d model by blender black color made for advertising panel enseigne 3d texte.

Blender Award

Award

Blender Bottle Lid Holder

Save space in your kitchen cabinets by storing your Blender Bottle lids (and the blender balls) on the under-side of the shelves. Stores two lids each. Recessed area for double-sided mounting tape (I used Scotch Extreme). No supports…

Monkey Skull Chalice AI Mesh Generation + Blender Displacement How to Video

Monkey Skull Chalice. HOW TO VID.

Blender Lid Funnel Replacement

After misplacing the original funnel for my blender lid, I designed a replacement that functions just as well, if not better. It is essential to use food-safe plastic for this print and to thoroughly clean the part after printing. The…

Hamilton Beach Blender Foot

This is as simple as it gets. Just a foot replacement for your Hamilton Beach Model 63100 or maybe others. Filament - TPU Flex Infill - 20-30% for is fine Layer Height - .15mm - .20mm Supports - None Parimeters - 2-3 Additional Parts -…

Ninja Blast Blender Cap

My wife recently bought the Ninja Blast blender, and wanted to keep the blades covered while the other parts are being washed or drying. This is a cap that uses the locking mechanism to stay in place. There's a notch for the printing seam…

Milk Frother / Blender wall mount

Wall mount for a milk frother / blender of make Rosenstein & Söhne. This model is an updated and improved version with a stronger back plate. The previous model was too thin and even 3M tape got loose.

Dice Slice - Blender Files

I want this to be a community project, feel free to remix and edit these in any way you like and create your own designs. It comes with extra shapes for the dice and all the meshes that I used on my sets. You can create your own tiles by…

Horizontal holder for hand blenders

The 30mm wide wall piece can be fixed to a tile wall using nano tape - using a spatula, it can be removed again. I used PLA-CF, printed the tool holding piece on the side with organic supports. The result might hold even a few kilograms…

REDMOND reduction gear pinion blender part

Replacing reduction gear for my blender REDMOND RHB-2989 Printed with all supports and 100% infill Link for 3D current build: https://cad.onshape.com/documents/4efdede2deb886cc3471b82e/w/d6d746b01895ab10e3f5c917/e/dd5c8b543cb3156e32807c29…

blender logo keychain

a keychain size 68.3x52.6x4.54mm i suggest print in the blue, white and orange PLA and use super glue

"Muses" | a project for practicing Blender based on mediocre AI models

I am practicing Blender right now, especially sculpting in the low-poly regime. And in order to do so, I thought: “I could use some mediocre statues in order to practice by improving them.” Well, where do you get mediocre things? Off to…

Blender Cup Safety Mechanism

Starfrit blenders have a safety switch that prevents the blender from operating until a blender cup is attached. The cups come from the factory with a small part screwed to the bottom for engaging the switch. This model is a replacement…

Wrench for Vitamix Blender blade assembly removal

This wrench can be used for removing the blade assembly from a Vitamix blender for the purposes of cleaning or blade replacement. I printed this out of PLA with 5 layers shell for added strength and 15% infill, but PETG or other materials…

Philips Blender Jug twist base

The jug for Philips blender 5000 series (HR3571, HR3573, HR3575 and possibly others), has a plastic ring that connects the jug which the blades. This ring can break when for example too much force is used when screwing on the blades. This…

Eta Gratus blender part

https://cad.onshape.com/documents/b50721fe6c10b5b100182bb9/w/4683345f8824ef8b392a8e9a/e/438e15fe94d040c0196c9b2c The original part is called SPOJKA MIXÉRU and it is part number ETA012800030

Eta Cabero - blender

Spare button for ETA blender work well. I glue them in stead of origin one.

Protein Shaker Smoothie/Blender 20oz Cup Handle.

Fits every 20oz blender cup I own, even pint glasses well. -Cheers-

Robot model made in blender

printed with supports at a smaller scale and designed in blender ps: my 2nd ever attempt at modelling

Hand Blender ESGE Zauberstab brand IKEA Kallax holder

A version of the original holder to mount it with one of the four IKEA Kallax screws from top. All 4 positions possible (mirrored STL attached). Useful if you want to mount your ESGE Zauberstab or similar shaped brands, like BAMIX or…

Coupler for Mueller Stick Blender

Coupler for Müeller MU-HB-02 Ultra-Stick Hand Blender Notes: Does not mate with original coupler, print and replace both parts Tested in PLA with: Inner/Outer/Inner 0.4mm nozzle 0.12mm layer height 40% infill Should probably be printed in…

Asian Blender Monkey

Its not a monkey, its not an blender monkey, but its an Asian blender monkey!

Gear wheel for Philips hand blender

Ninja Blender BN800EU Dust Cover

It's a branded Dust Cover for the Ninja BN800EU. It may also fit other Ninja Blender but I can't verify that.

Suzanne Key Chain (Blender Monkey)

I wanted to have a Suzanne Key Chain (the monkey in Blender) as a tribute to this wonderfull piece of software and the people who develop it. This is about 4cm tall and is printed with a 0.1 mm layer height. I had some problem with the…

Beast Mini Blender Blade Guard

A few blade guard options for the Beast Mini Blender. This lets you keep the blade attached to the motor after washing everything and let the blade dry out. This also helps if you need to pack up everything for travel. It comes in two…

Blender stand (bosch)

A stand for bosch blender … nothing to add :)

Samsung JET vacuum adapter easy to change diameter in blender!

With this adapter you can connect an item with an diameter of 35.5mm to the Samsung JET body or long shaft. The blender file is included, so you can make it the size you need: 1. Select the item “other size” in the hierarchy. 2. Change…

Shower drain filter w/Blender file

Shower drain filter 72mm diameter 53mm height Knob for lifting Printing Print with bottom down No supports necessary Some brim may be needed - depends on speed and printer Slow print may be beneficial Example print Clas Ohlson generic…

Beauty Blender and brush holder

The holder is a nice way to keep the beauty blender and a small brush in the same location. At the same time it provides a space where they can dry. Blender diameter up to 45mm Brush diameter up to 5,5mm Printed mine with fuzzy skin on…

Real Appeal HL-2571 Blender knob replacement

Replacement knob for the Real Appeal HL-2571 blender. My original eventually snapped in half so I modeled this in Freecad and printed it in pla. I've included the Freecad design files and a step file if you want to modify, as well as the…

Wide Omega Boomerang in Blender and Sverchok

This is just the same as my previous Omega design in Blender and Sverchok, just a little wider. I actually like this one a little better, it seems to have a little more range and it is less floppy with its wider wings. This is an original…

Hand Blender Wall Holder

This is a wall mount for Bosch hand blenders. Print from PETG for it to be strong enough to withstand kitchen use. If you would print this from PLA, the layer adhesion would cause it to fail. PETG does not have this problem.

Nutribullet magic bullet blender organizer and drying rack

This remix is for those who lost 1 cup and its attachments.

Beauty Blender Stand Easy to Print

Printing without supports

IVAR Ninja Blender Cup Holder

IKEA's IVAR shelving and Ninja's blender cups, together at last. In our house we have a glut of these Ninja blender cups. We also happen to have a similar glut of IKEA IVAR furniture - where these cups were already stored, in front of an…

"i know houw too use bender" Blender certification

you might need to scale this up a bit since I made this in blender

Cartoon 30K Poly Blender Test OBJ Clean Mesh

Have Fun IF you REMIX mark as REMIXED !!

Filament blender for aluminium extrusion profile

All credit goes to Make Anything for giving me this idea, his video on the topic can be found here: furthermore, his free STL files to his original version can be found here: https://www.myminifactory.com/object/3d-print-138353 or in the…

Bosch MSM 67165RU Hand Blender Clutch

I recommend printing horizontally. If you print vertically, there is a risk that high stress may cause it to break. Unfortunately, this cannot be avoided.

Perilla para Licuadora Black & Decker - BLACK & DECKER BLENDER KNOB

Repuesto de perilla de licuadora Black & Decker realizada en PLA celeste. ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ Replacement Black & Decker blender knob made of light blue PLA. Perilla realizada en PLA celeste con altura de capa de…

Ninja Blender Rubber/Silicone Drive Gear

Replacement drive dog/gear for a Ninja blender that shears off with use. Best printed in TPU for toughness. STEP and SLDPRT files also included for modification. Depending on printer you may wish to scale the part in x/y to increase…

Miniature Blender Model

Toy Blender Minifigure

Trail Map Generator | TrailPrint3D | Blender Addon

INTRODUCTION This is a Addon for Blender that allows you to create Miniature Maps of your adventures from just the GPX file that you can download from Komoot, strava, garmin or other tracking apps! No blender knowledge required SUPPORT MY…

multicolor blender beads

A 3D model logo of Blender beads for laces The model comes with several different hole sizes. This model requires changing filaments at specific heights. It can be done with any printer! The filaments I used are: orange, white and blue.

How to Render Your Models In Blender

I spent the last few days figuring this out. There are lot of tutorials out there online on this and setting up lighting is something it seems that you need a masters degree in and you could still learn more in the process. What I really…

Dummy 13 Assembled in Blender File

A file all assembled so I could make a lock screen for my phone. You can pose it whichever way if you have blender.

Magic Bullet Blender Lid and Base Rack

I got tired of the lid rings, caps, shaker lids and the blender base for my Magic Bullet sitting in a loose pile and wandering away, so I got them all lined up in one place. This rack holds 5 standard lids or thread rings, along with one…

Hexagonical cutout Remote holder (with blender file)

A little hexagonical-cut out Velux remote holder. Print with no supports, allows for a snug basket to place a remote holder for Velux windows.

Knitted Egg (blender)

Printing Information: Use tree supports to support the interior off the egg while printing Use a brim to improve the bed adhesion The technique I used was based on this tutorial by EngineerNick : The blender file is provided would you…

Blender Stopper

This is a blender stopper I made for my uncle's blender and sharing with the world in case you're also in need of a blender stopper! Prints pretty easy, but make sure your bed adhesion is decent so the top isn't warped. The image included…

gears for blender Moulinex quickchef+ DD673B10

gears for blender Moulinex quickchef+ DD673B10

Blender Discombobulate Doodad Pen

Pen designed with Blender 3.0 using discombobulator.

Beauty Blender stand Diamond (NIUQI)

Beauty Blender stand Diamond (NIUQI)

Beauty Blender Biedronka edition stand ( NIUQI ) makeup

Beauty Blender Biedronka edition stand ( NIUQI ) makeup

Multifunction blender release lever

Original snaped in half…. Few minutes in FreeCad and voila…. I printed it with ASA 3 walls 10% infill with a infill modifier around the shaft hole to 100% Last ⅓ of modelmodified the layer height to minimum to avoid having large layer…

Black & decker blender sprocket

It’s the piece that go under the one in the picture. I couldn’t take it off because it’s really tight.