Mueller Ultra-Stick Hand Blender - Motor Piece
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is the motor drive piece for the Mueller Ultra-Stick Hand Blender.
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 443
- Wydruki
- 2
- Wyświetlenia
- 3007
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a replacement part for the Mueller Ultra-Stick Hand Blender (SKU MLR010001N) motor housing. This is the piece that connects to the main motor/drive head and not the separate “union” attachment pieces.
**If you need the separate attachment piece that fits into this piece and is attached to the mixer attachments, please see that piece from LostMFG here.
I modeled this off of a broken piece. It fits very tight on my unit, but that is intentional. This is the main piece transferring all the drive motor torque to the attachments below. I have been using mine for a couple of weeks without issue, but I will update this if anything changes.
I printed this with PLA with 100% infill due to the small part size and forces it experiences. This piece will not go in the dishwasher, so PLA + or PETG could be used if you experience breaking with PLA.
*****Update November 2024****
I've been using this for over a year now. I have noticed this piece will sometimes get stuck on the “union” piece after use. It can be easily pulled off and placed back onto the drive unit. You could print multiples of this and leave them on the union pieces semi-permanently if you experience frequent sticking or difficulty removing it. I prefer the tight fit due to the torque the piece is experiencing, but your mileage may vary.