KLP1 - Filter attachment for riser exhaust port
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An attachment for a 100mm x 100mm x 30mm air filter
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 98
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I have been wanting to get into more exotic filaments like ABS and ASA but don't want to give myself and my family cancer. After looking into recommendations I decided I needed a combo HEPA and activated carbon filter and ventilation.
I am using this riser upgrade https://www.printables.com/model/612282-riser-upgrade-for-kingroon-klp1
with this fan mod https://www.printables.com/model/698579-riser-upgrade-for-kingroon-klp1-back-wall-modified
and these filters https://www.amazon.com/dp/B0BJB8BV89?ref=ppx_yo2ov_dt_b_fed_asin_title
The filters simply slide in/out. This is designed to connect to a 3" flexible ducting.
I printed in PLA with a 15% infill.