Eddy probe neptune 3 adapter and cable guide
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Eddy probe adapter for Elegoo Neptune 3 Pro/Plus/Max (may fit 4-series) and cable guide. With or without brass inserts
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 208
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
My Klipper config: https://github.com/spajo/n3p
This mounts both Eddy and stock probes to the extruder if you need flexibility or are just experimenting. I used threaded inserts to make the eddy a little more rigid.
I will probably switch back to using this adapter as it also fits Neptune 3P-series after I finish experimenting with this setup.
Eddy Duo/USB has quite a bulky cable so to avoid dragging it on print surface I also designed a cable guide that replaces original X-axis limit switch cover.
18.01.2025: Added no-inserts version
I used BTT and Elegoo provided models of Neptune3Plus and Eddy to make measurements.
https://github.com/elegooofficial/neptune3plus
https://github.com/bigtreetech/Eddy/tree/master
Offsets for stock probe
x_offset: -28.75 # stock probe with eddy adapter
y_offset: 25.15 # stock probe with eddy adapterhttps://github.com/spajo/n3p/blob/main/printer_data/config/probes/stock.cfg
Offsets for Eddy probe
x_offset: -44.29
y_offset: 29.76https://github.com/spajo/n3p/blob/main/printer_data/config/probes/eddy.cfg
Original Probe Offsets without the adapter
x_offset: -28.75
y_offset: 22Extruder fan shroud visible in photos: https://www.printables.com/model/857706-ultra-efficient-dual-5015-fan-duct-for-elegoo-nept