1 / 10
Sherpa Mini Extruder with PICO MMU Runout filament sensor
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mod allows to equip the Sherpa Mini Extruder with a runout sensor that could be used with a PICO MMU
- Ocena
- 5 / 5
- Polubienia
- 87
- Pobrania
- 399
- Wydruki
- 2
- Wyświetlenia
- 3747
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 2) (Komentarze: 5)Remiksy (3)Kolekcje (116)Powiązane
You would need to print:
- Shepa Mini Extruder adapter - only one part and swap from the original (5x M3x5x4 inserts needed for the whole mod)
- 4 lane adapter with runout sensor (I've printed one from transparent PET)
Important information:
The MMU 4lane model should be printed horizontally to make the inside layers create a smooth path for the filament.
BOM:
- 2x M3x5x4 insert
- 2x M3x8 screw
The rest of the necessary parts to run this mod can be found here in the original PICO MMU GitHub repository.
Sherpa Mini Extruder can be found on Annex-Engineering GitHub.
Credits to LH