Window hold-open bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Wstępna wycena dla PETG
6,04 € – 7,39 € netto (bez VAT)
Dla pliku: Window hold open bracket v2_0.4n_0.2mm_PETG_COREONE_4h29m.bgcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 6,72 € netto (środek widełek).
- Masa podana przez autora
- 140 g
- Czas druku podany przez autora
- 4,48 godz.
- Materiał u źródła
- PET
- Materiał wyceny
- PETG
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
Designed to fit Simonton Brickmould 300 double hung windows
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 518
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
Designed to fit Simonton Brickmould 300 double hung windows
Great for listening to the rain, but not letting the rain in since the only gap is at the top.
Picture shows a top-down view
Must print with PETG to avoid sunlight warming and warping the plastic in the summer.
I printed mine green simply so I would see it and not forget the window was propped open.
Part 1 should be printed with supports under the large gap only.
Part 2 no supports, but 100% infill suggested, this is the push pin that locks the bracket from being lifted out, especially important during high winds.
Don't have a 3D printer yet? That's OK, order already printed from…