Window hold-open bracket
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€6.04 – €7.39 net (excluding VAT)
For file: Window hold open bracket v2_0.4n_0.2mm_PETG_COREONE_4h29m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €6.72 excluding VAT (range midpoint).
- Weight reported by the author
- 140 g
- Print time reported by the author
- 4.48 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Designed to fit Simonton Brickmould 300 double hung windows
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 16
- Makes
- 0
- Views
- 518
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Share Alike
Designed to fit Simonton Brickmould 300 double hung windows
Great for listening to the rain, but not letting the rain in since the only gap is at the top.
Picture shows a top-down view
Must print with PETG to avoid sunlight warming and warping the plastic in the summer.
I printed mine green simply so I would see it and not forget the window was propped open.
Part 1 should be printed with supports under the large gap only.
Part 2 no supports, but 100% infill suggested, this is the push pin that locks the bracket from being lifted out, especially important during high winds.
Don't have a 3D printer yet? That's OK, order already printed from…