Search results: open

Counting matching models…

BOX OPENER V2.0 - TESTED

Made two new versions with a more durable tip. 2.1 New tip with wider angle 2.2 Extra edge blend added

Downloads: 9,886
Likes: 2,058
Rating: 4.82

TrackVision - The Open Railway Project

TrackVision - The Open Railway Project Welcome to the TrackVision ecosystem! This is a comprehensive, custom-designed model railway project built from the ground up for makers. It features a unique, non-standard scale engineered…

Downloads: 21
Likes: 4
Rating: 0

Order a print of this model

Printables

3.5mm TRRS Jack Motherboard Soldering Tools for Variable Openmod Part 3

Designed to help with soldering for the TRRS 3.5mm jack motherboard. Made to help with build a Variable Openmod Part 3. This is a tool to help soldering 3 wires into one for ground. And a tool to help hold wires when soldering into a TRRS…

Order a print of this model

Printables

Micro-ATX Open Frame Case

A minimal open-frame case for Micro-ATX motherboards. Designed to serve as the base for hardware testing rigs as seen here: It should be compatible with any Micro-ATX motherboard and SFX PSU. The ones in the photo are: Gigabyte B760M DS3H…

Order a print of this model

Printables

twist open beer bottle opener

print as shown in the photo. fast print, no supports, no brim. cheers! update 2-10-25 added 3rd version with two holes for 6mmx1.8mm magnets Category: Kitchen & Dining

Order a print of this model

Printables

Phone display opener V1.0

You can print with pla and 15% infill

Order a print of this model

Printables

Pen/Knife/Letter Opener Holder

Wanted an easy-to-reach place to hold some pens and a favorite knife. Used Tinkercad to join the models and edit the pieces.

Order a print of this model

Printables

Parametrizable Rugged Box Franck Version (OpenSCAD)

Remix of "Parametrizable Rugged Box (OpenSCAD)" by https://www.thingiverse.com/thing:4768000 Added options for inner dimensions and user friendly parameters: https://www.youtube.com/watch?v=rp665S-Zts8 As you can see in the video you can…

Order a print of this model

Printables

Wilma Tüftelbausteine - Open-Source Prototyping Kit

Note: All content on this page was translated in collaboration with an assistant. The original website is in German, and you can find all details and information in German on Wilma Tüftelbausteine . What are the Wilma Tüftelbausteine?…

Order a print of this model

Printables

Blast Gate - Do_50_slider open

i had the problem of dust collecting in the slot of the slider, so after some time i could not close it anymore. so i made another slider with the 50mm hole and i cut of the pins of the original slider. now instead of opening and closing…

Order a print of this model

Printables

Bottle Opener Bitcoin

Needs two magnets (size Ø10*3mm). One to catch the cap and the other to hold the bottle opener on a magnetic surface. Setup magnet by pressing or hammering them into the part. It's better to secure them in place with superglue. There is…

Order a print of this model

Printables

Bottle Opener Ethereum

Order a print of this model

Printables

square twist-lock box with wide opening, many sizes

Since twist locks (bayonet locks) are round, they don't match square boxes that well, usually resulting in an opening quite a bit smaller than the ‘storage area’ inside, like my previous square twist-lock box . This model however tries to…

Order a print of this model

Printables

Bottle opener with cap catcher

Magnetic Bottle Opener with Cap Catcher. Perfect on your fridge ! I used magnetic tape (20mm x 2mm) purchased on internet: https://s.click.aliexpress.com/e/_c3Foy5kB To set it up, cut the magnetic tape to the desired length and attach it…

Order a print of this model

Printables

OpenMV RT1062 Cam Case with Embedded Bendy Tripod

Description This is a remix of two models - both of which have been modified. Model one is the 3D printable case for the OpenMV Cam RT1062 V4; model two is the Bendy Phone Tripod and Stabilizer. The result is a cam case with an embedded,…

Order a print of this model

Printables

Requiem - Scolopendra Queen

Regular Scolopendra available here .

Order a print of this model

Printables

Rollerski (Skiroller) and poles carry holder [OpenSCAD]

Rollerski and poles carry holder. Securely holds everything in place while you travel to the ride via any menas of transport or by walking. Easily adaptable to particular rollerskis thanks to OpenSCAD source. Simply adjust parameters in…

Order a print of this model

Printables

Camera mounts for the shelf edge and for any surface with double-sided tape [ OpenSCAD ]

Attachment mounts for lightweight cameras with standard tripod screw (1/4-20) Usable for baby cameras, web, streaming cameras or any other lightweight cameras. Shelf side mounts are designed for Ikea Kallax shelf top section and baby…

Order a print of this model

Printables

open ligtbox

Open sing ligtbox its not work if you dont do : infil 0% top layer 0 enjoy!

Order a print of this model

Printables

My Open Source Motorized Bionic Hand

With just some nylon threads, 6 motors, and an Arduino, you can build your own hand. I'm also sharing the code. It’s more of an aesthetic solution, and it's also intended for robots. Here in action: When printing the fingers, set the…

Order a print of this model

Printables

double happiness cookie cutter (OpenSCAD)

This model is designed for cutting fondant then applying the double happiness symbol to the surface of a a wedding cake. The model is created from a black and white image. First the image is processed using InkScape to produce the file…

Order a print of this model

Printables

Fidget Box Opener

Fidget Box Opener Like the original model, just make a ring on the inside to make it spin. Print setting : 0.2 layer height 3/4 perimeters 15% or more infill if u want it solid gyroid infill random z-seam Print in place. 2 versions…

Order a print of this model

Printables

Roller wheel gantry plate for 2040 4040 vslot extrusion - similar to openbuilds

A gantry plate for 3 roller wheels that fits on a 40mm wide v-slot aluminum extrusion. For a full assembly you need: 3 roller wheels with 24mm diameter 1 eccentric nut ID 5mm that fits in a 7mm hole 2 spacers ID 5mm 3 fasteners M5x28 or…

Order a print of this model

Printables

Prusa XL Enclosure Door Opening Angle Limiter

Prevents my garage door from running into the enclosure door. Reuse the original stopper/magnet assembly. Add one M4 fastener per side. Printed in PLA.

Order a print of this model

Printables

box opener (for boxes)

box opener

Order a print of this model

Printables

Mini ITX Open Frame Desktop PC Case

Unleash your creativity with the Mini ITX Open Frame Desktop PC Case! This compact PC case is designed for enthusiasts who love individuality and seek the perfect blend of functionality and design. Why Choose Our Case? ✅ Printable on Your…

Order a print of this model

Printables

AeroGarden Seed Pod Cover (Larger Opening Remix)

All credit goes to @755123BE for the original design. Just like the original, these covers are designed to be used with “ AeroGarden Seed Pod->Shrouded ”. The original works great and are still my go to when starting out, but as my plants…

Order a print of this model

Printables

M12 LENS CAMERA BODY OPENIPC

Use 3mm diameter, 3mm deep heat inserts on the sides. Printing: Layer thickness should be 0.1mm for the threads to print correctly.

Order a print of this model

Printables

3D Rounded Open Heart - No Supports

A curved heart cut-out that prints with no supports! Scalable and smooth. Powered by Image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)

Order a print of this model

Printables

Prusa i3 MK3/4 PTFE tube holder for filament routing and reverse bowden - reinforced and open hole

It's a bit jenk looking, as I barely know how to modify an STL, but I did what I could and it should be functional. I mostly hope that the original creator will share the original 3D files or make these new and improved versions…

Order a print of this model

Printables

Single rod closet wire shelving bracket (openscad)

The original model looked great when the other half saw it, and wanted some for the closet. After quickly realizing that our builder selection had only a single top support rod instead of 2, I closed off one in the slicer to test. Close…

Order a print of this model

Printables

Geometric opening ring box - print in place

Use something different to hold your ring, this box opens in a unique way. The box itself is print in place, I used 0.4mm nozzle with 0.2mm layer height and fairly standard settings. The ones shown in the pictures are Bambu Lab PLA Matt,…

Order a print of this model

Printables

Yet another Funko Pop wall mount hanger, now in openscad

Inspired by Pixiemagic's wall mount, I wanted to be able to create a more adjustable design in OpenSCAD for different sizes pops while also rounding the edges a touch. You can also use these in a dual configuration, one on top and one on…

Order a print of this model

Printables

OE-VO70 RC Volvo Open 70 Sailboat

RC Sailboat based off of the Volvo Open 70 Groupama 4 Model is 1m long It requires a minimum 3 channel radio to be able to control the sails, Keel and the rudder. It can be built as a 2 channel model as well with a fixed keel. Bill of…

Order a print of this model

Printables

Dragchain - open end

Dragchain - open end Dimentions 20 x 17 OD 10 x 12 ID Uses m3 mounting holes on a 8mm spacing. You can print it out of PLA for a smoother action.

Order a print of this model

Printables

Stereo Phono Jack mount for sloped case--OpenSCAD file included

This allows dual RCA phono jacks to be mounted inside a case where the back panel is sloped at 45 degrees. I have a Revox B790 turntable that I am refurbishing and the phono cable was hardwired. This will allow me to disconnect the phono…

Order a print of this model

Printables

NeoGeo Open MVS - MV1B Case

Use a NeoGeo MV1B-Board (and case) with the Open MVS PCBs and Stereo Mod. It uses the original MV1B Shell. There are 2 versions available. One Split-Version for “smaller” printers and one complete. The front has an 8mm hole, that can be…

Order a print of this model

Printables

Backdrop for OpenScan Mini

No support required, printed in 2 half shells and glued

Order a print of this model

Printables

OpenIPC RubyFPV Runcam camera base plate mounting

Order a print of this model

Printables

BOX OPENER V3- LESS FILAMENT

Easy to print, less filament, and works great! Same concept, all with less filament, and same functionality!

Order a print of this model

Printables

OpenSourceSDR Lab AMP case

H4Mのアクセサリーとして同梱されている50MHz〜6GHz20dBアンプのケースタイトに作成しているので、AMP基板によっては入らないかもしれない。 Case-AとBの固定は爪以外にボスの0.05mmのオーバーラップを利用している。基板をCase-A,Bのボスで挟み込みガタツキを防止している。一旦ケースを組み合わせると分解は困難。開封にはCaseの天板と側壁の隙間に薄い板を差し込み、こじりあける。…

Order a print of this model

Printables

OpenIPC Radxa Zero 3W VRX case -- 3x EU RX cards w/ HDZero rail mounting

A model to mount a Radxa Zero 3W running OpenIPC onto the HDZero Goggles. Space for 3x 8812EU rx wifi cards and 6 sma antenna holes.

Order a print of this model

Printables

Hammer Bead with open handle to feel your drawstring (6mm)

A hammer bead with a open handle to feel your drawstring while you go to work. 6mm hole. Thanks for the support.

Order a print of this model

Printables

Adjustable Vent : Twist action open/shut

It fits into a regular 36 mm (OD) waste pipe with an inner diameter of 31.6 mm. Intended for air ventilation purposes, not liquids. I made it a bit loose to ensure it went in without compressing the printed thread. Needed a couple of…

Order a print of this model

Printables

Gridfinity Pizza Cutter Holder (with optional bottle opener)

Overview This is a 3×5 Gridfinity insert designed to hold a pizza cutter, ideal for keeping your kitchen drawer or workshop more organized. It’s something I made for fun and thought others might find useful too. Versions Included There…

Order a print of this model

Printables

Fully parametric box generator in OpenSCAD

Fully parametric box generator in OpenSCAD (updated to v.1.4 - 24.3.2025) This is a feature library for OpenSCAD for rugged boxes that can be printed at once. It is not designed for boxes with separate bottom and top parts. There are two…

Order a print of this model

Printables

Tea Light Candle Holder with Cover with Diamond Openings

Three pieces to this tea light candle holder that can be printed separately with different colors. The legs will need to be glued into the base, but the cover sits over the base and can be taken off and on to light the candle. You should…

Order a print of this model

Printables

Book (Open) End

I created this reversible bookend in SolidWorks with some inspiration from Matt's Book https://www.printables.com/model/1138282-book. I have not printed it yet but did Slice it with Cura for my Ender 3. Mostly because I wanted to create a…

Order a print of this model

Printables

ESC bottle opener

I have redesigned the Prusa bottle opener for my school student club ESC - Engineering Student Club. The coin hole is also larger at 2,1mm for easier coin insulation. You have to use 1,- CZK

Order a print of this model

Printables

openGrid - Self-Expanding Snap

An open-source self-expanding snap for openGrid, available in Standard and Lite versions. It is based on David D's official openGrid snap, with a split spring mechanism that expands when the connector is tightened. This gives the snap a…

Order a print of this model

Printables

OpenTube for Tennis Balls

An open-source tennis ball pressurization and rehabilitation device, engineered to utilize a standard football valve and two R-32 O-rings, enabling easy construction, cost-effective maintenance, and sustainable reuse of tennis balls.

Order a print of this model

Printables

SeedSigner + Smartcard Reader Hat (OpenPill Mini)

OpenPill Mini casees modified to accommodate smartcard hat. There are a number of different models and what you need will be dependent on both the cardslot(s) that your reader hat has as well as how you have connected it, Stacking Header…

Order a print of this model

Printables

Nuki baseplate 45 degree right side doors opening out

it is for nuki 2.0 and 3.0 created with help of @LAtelierdeFlorent

Order a print of this model

Printables

MaxiMoop Autonomous Sailing open water Platform

MaxiMOOP: A Multi-Role, Low Cost and Small Sailing Robot Platform Authors and Thanks: Paul Miller, Matthew Hamlet, Colin Sauze, Mark Neal, David Capper, Daniel ´ Clark, Ashley Iles, Louis Taylor Here you can find the edit files (STEP) for…

Order a print of this model

Printables

Abre botellas · Bottle opener

Categoría: Producto de apoyo Contexto de uso: Alimentación y ocio Modo de uso: Para abrir tarros y envases con tapones de hasta 25 mm de diámetro Notas: Compatible con los tapones de leche Hacendado Recomendaciones: Consulta el modelo…

Order a print of this model

Printables

Platonic Solids (OpenSCAD)

Ancient Greeks knew about them; the Platonic Solids are fascinating. You can read all about them here: https://en.wikipedia.org/wiki/Platonic_solid These are the solid shapes of the 5 Platonic Solids. The solid shapes are here . <this…

Order a print of this model

Printables

Platonic Solids - stick and ball (OpenSCAD)

Ancient Greeks knew about them; the Platonic Solids are fascinating. You can read all about them here: https://en.wikipedia.org/wiki/Platonic_solid These are stick and ball shapes of the 5 Platonic Solids. The solid shapes are here . The…

Order a print of this model

Printables

Platonic Solids - hyperbolic (OpenSCAD)

Ancient Greeks knew about them; the Platonic Solids are fascinating. You can read all about them here: https://en.wikipedia.org/wiki/Platonic_solid These 5 models are hyperbolic shapes of the Platonic Solids. The solid shapes are here .…

Order a print of this model

Printables

Platonic Solids - chart (OpenSCAD)

Ancient Greeks knew about them; the Platonic Solids are fascinating. You can read all about them here: https://en.wikipedia.org/wiki/Platonic_solid The solid shapes are here . The stick and ball shapes are here . The hyperbolic shapes are…

Order a print of this model

Printables

BD1 "Chimera" - Open source FPV 2.2" drone

BD1 “Chimera” Made in Poland Chimera is 2,2" freestyle cinewhoop type drone, for 3S batteries, with fully 3D printed construction Ready-to-flight mass(with lamp, battery and wings) : <200grams Carry weight : Can fly with light action…

Order a print of this model

Printables

Klippt for OpenGrid / multipoint on OpenGrid

Multiboard created a cross piece for Klippt using this piece with multipoint to use Klippt on their board. I am using OpenGrid and I wanted to use Klippt, so I made these pieces. David D already has multiboard compatibility snaps, but not…

Order a print of this model

Printables

Quad Lock Base OpenSCAD Component

OpenSCAD Quad Lock 360 Base A base adapter for Quad Lock 360 mounting components. I had a project where I need to create a base for a Quad Lock 360 MAG Wireless Charging Head. Not finding one in OpenSCAD, I put this together. The…

Order a print of this model

Printables

Black & Decker 18v lithium ion battery holder with multiconnect for opengrid

This is the same holder as the original but with a multiconnect connector spaced to fit the opengrid system. I printed this in PLA with 0.2 layer height, 0.4 nozzle and organic supports on build plate just in case. Fits snuggly but not…

Order a print of this model

Printables

Bottle opener

bottle opener

Order a print of this model

Printables

MultiConnect Spool Holder for OpenGrid, Multiboard

UPDATED! - I have added Reversible ones so the handle can now be to the left or right Keep your filament organized with this modular spool holder designed for OpenGrid and multiboard systems! Perfect for workshop organization and easy…

Order a print of this model

Printables

Open Sauce 2025 - Tag - Fast Printing - Multi Color

Just a simple tag commemorating Open Sauce 2025. Two options are available; emboss or deboss. Print in any multi-color material. Prints in under 14 minutes; Measures 73 x 43 x 2 mm. Use it on your back-pack, luggage, keychain or anything…

Order a print of this model

Printables

Gutter Guard Filter (for 68mm opening)

This print fits if you remove the screws beneath that are holding the down spout to the gutter. Then the filter can be added and the screws can be screwed back in place and into the model to help hold it in place. I would recommend PETG…

Order a print of this model

Printables

Universal Bottle Opener (Coin)

No-Support Universal Bottle Opener (Coin-Assisted Design) No-support-required, the 3D-printable universal bottle opener is designed to open both twist-off beer bottles and standard metal/plastic bottle caps. The design uses a South…

Order a print of this model

Printables

Roof window opening rod

Universal wooden roof window extension rod for opening. My window has 40mm wide frame where I can attach this rod. Source file (FreeCAD) available for possible modifications. Motivation I have roof window (not Velux) which is inaccessible…

Order a print of this model

Printables

OpenGrid Lite 8x1

I needed a single set of squares and downloaded the step file, went to fusion. Was only able to get some of the faces removed. Took the remaining parts and cut them off the top and saved the above prusa slice version I've uploaded. Please…

Order a print of this model

Printables

openGrid - Framefit Hook Generator

An open-source frame-fit hook generator for openGrid . This model attaches directly to the frame of an openGrid board, so it does not need a separate snap or openConnect connector. The default settings generate a compact hook for holding…

Order a print of this model

Printables

lietadlo Boeing 737 s nápisom OPEN SAUCE

model lietadla Boeing 737 s nápisom OPEN SAUCE

Order a print of this model

Printables

GoPro Hero 8 Mount for Framex Battery door open

GoPro Hero 8 Black Mount For FrameX - this has the battery side open to allow for access without removing the GoPro - Please note this can lead to losing the door in heavy crashes - ask me how i know

Order a print of this model

Printables

The Open Node 10 in Server Rack

The Open Node Project enables anyone to deploy enterprise-grade, decentralized physical infrastructure. Starting with the best open-source, 3D-printable 3U+ 10-inch server rack design: BOM for ON-1 Frame Part Units Notes ON-1 Frame 2 uses…

Order a print of this model

Printables

Plastic/PET Bottle Cap Opener

Dual ring for easily opening the cap (only the most common size of approx. 30mm DIA) of a plastic/PET bottle. Sizes Five different sizes of hole for caps are available. (Only one size of hole for fingers, 22mm.) I recommend that you try…

Order a print of this model

Printables

Elegoo Centauri Carbon - Opencentauri Community CAD model

Also available through the opencentauri CAD github Live interactive model you can link into Fusion 360 on the Opencetauri Docs . Community Centauri Carbon CAD model with many contributions from in the Opencentauri server as well as…

Order a print of this model

Printables

Printable Lazy Suzan & Planetary Gear Vise Open Ball XL

UPDATE 2025-09-09: I've added the missing lazy susan files. Thanks for letting me know! I got impatient waiting for the lazy suzan to arrive from Amazon so I designed a printable version. While I was at it I remade the fractal vase to…

Order a print of this model

Printables

Magnetic encoder mount for hoverboard wheel motor (FFBeast, OpenFFBoard) - all in one solution (drill guide, assembly guide, encoder holder), even your grandmother can do it

If you appreciate my work and like it, you can buy me a coffee ;) but this is absolutely not expected. Short introduction: The alignment of the magnet and encoder is the most critical factor for the mechanical precision of the steering…

Order a print of this model

Printables

John Deere 20 series hood for openrc tractor mk3

an updated john Deere styled hood for openrc tractor mk3 from wekeas original version (https://www.myminifactory.com/)

Order a print of this model

Printables

round tray with lid | runde Dose mit Deckel | different sizes | customizable OpenSCAD- Script

round tray with lid | runde Dose mit Deckel | different sizes | customizable OpenSCAD- Script → 0.4 Nozzle → 0.2 mm Layer Height → 20 - 30% infill → PLA

Order a print of this model

Printables

(old) OpenSCAD: basic modules and planetary gears (v19) (please check v25)

This is based on / beruht auf: Bibliothek für Evolventen-Zahnräder, Schnecken und Zahnstangen Autor : Dr Jörg Janssen Stand : 29. Oktober 2018 Version : 2.3 Lizenz : Creative Commons - Attribution, Non Commercial, Share Alike Thingiverse:…

Order a print of this model

Printables

(old) OpenSCAD: bevel gears (v16) (please check v25)

Order a print of this model

Printables

OpenSCAD: fischertechnik (v25)

Verbindungen, Adapter: Statikteile mit S-Riegel verbinden ft-Nuten und Federleisten einbauen ft-Rastachsen verwenden Erweiterungen des ft-Systems: Hohlwelle (hollow shaft) 10 mm mit Durchgang für ft-Achse 4 mm) einbauen, adaptieren…

Order a print of this model

Printables

OpenGrid Bicycle Helmet Hook

A helmet hook adapted for openGrid , using a snap-fit Multiconnect connectors.

Order a print of this model

Printables

OpenSCAD Vacuum cleaner adapter (fully customizable)

Some power tools may have special diameter for vacuum cleaner connection instead of standard one. This is the case with my sanding machine. So I created a very simple adapter. Current one is made for connecting Bosch PSS 250AE sanding…

Order a print of this model

Printables

OpenSCAD Parametric Hieroglyphic Alphabet

Parametric Hieroglyphic Alphabet. Just set you word and that's all. Replaced all bitmaps with vector hieroglyphs, so render is faster and better. Partially rewrite of code. IMPORTANT Decompress Alphabet.zip once downloaded. Update…

Order a print of this model

Printables

OpenSCAD Spool Drawer Storage Box (fully customizable)

Yes, another spool drawer ! Dozens of models are available. I looked at them, I was inspired by the best of every ones. Here it is. This one is fully customizable : Spool size (width, height, depth) Number of racks Number of floors Number…

Order a print of this model

Printables

Customizable OpenSCAD Store hours sign

An OpenSCAD script to generate a store hours sign. Use filament change option in slicer to change color.

Order a print of this model

Printables

Open-Source Storage Caddy

A modular system with simple yet effective caddy system.

Order a print of this model

Printables

Raspberry Pi Zero + stereo output sockets case customisable parametric OpenSCAD

I wanted to make a Raspberry Pi Zero-based internet radio, which now works nicely and is called ‘PiZeRadio’. This model provides a case to hold the Pi Zero, a PCM5102 Digital Analogue Converter (DAC), and outputs to a pair of RCA red and…

Order a print of this model

Printables

OpenGrid Desk Mounting Clamp

I wanted a way to directly mount OpenGrid to my desk, so made this. It's designed for my desk, so I've added the STEP file in case you want to adjust it to your own dimensions. I put 2 snaps per clamp for a stronger hold. Note When…

Order a print of this model

Printables

Soda Can Opener

Order a print of this model

Printables

AlexOpenFeeder 8mm 12mm

By trial and error I brought it to perfection, in my opinion ))). Almost all the details were remade from the original. If you have any comments, write in the comments, I will be glad to hear. The model uses a standard set of springs (see…

Order a print of this model

Printables

Monster can opener - dumbbell

Dumbbell shaped can opener. Four printed pieces, one m3x30mm bolt. Printed with PC, but PETG should be plenty strong. Top piece is attached with superglue.

Order a print of this model

Printables

openGrid Gadget - Hook Generator

An open-source gadget hook generator for openGrid . This model creates hooks that screw into openGrid self-expanding snaps . While other hook generators are available for the openGrid system, this model addresses some specific use cases,…

Order a print of this model

Printables

(old) OpenSCAD: basic modules and fischertechnik connectors (v18) (please check v25)

OpenSCAD: Zubehör und Adapter auf fischertechnik (ft) Zum Aufbau von neuen Teilen oder Grundkörpern: - Nuten liegend und stehend, flach und als Vollrund - Federleisten - Rastachsaufnahmen - Hohlwelle: Antriebswelle für ft-kompatible…

Order a print of this model

Printables

Simple basic parametric curved corners cube in OpenSCAD

This OpenSCAD code is just a few lines that will make a cube with rounded corners. It works very like the ‘cube’ statement. This code is a module so, instead of the call looking like “cube ([123, 234, 345]);”, the call would be “nice_cube…

Order a print of this model

Printables

Jack-o’-Lantern thicker walls and open face

I really liked the original design – definitely one of the best Jack-o’-Lantern models I’ve found so far! For my remix, I made the walls a bit thicker than the vase mode version to make it sturdier while still keeping it lightweight. I…

Order a print of this model

Printables

openGrid Gadget - Plier Holder Generator

An open-source plier holder generator for openGrid . This model creates plier holders that screw into openGrid self-expanding snaps . It is designed around a stem for the pliers to hang on and a front stopper that helps keep them from…

Order a print of this model

Printables

OpenSCAD library for HSW wall and attachments

Preface There are good HSW OpenSCAD customizers out there as well as libraries to generate attachments, some I collected in this collection . What I found lacking was the ability to generate attachments on a grid and the ability to…

Order a print of this model