1 / 5
Official LTT Screwdriver IKEA Skadis Holder Remix using T-Nuts Mounting System — zdjęcie 1
1 / 5

Official LTT Screwdriver IKEA Skadis Holder Remix using T-Nuts Mounting System

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Remixed the original LTT MCM Power Bar Key Screwdriver Mount for Skadis plates to work with The Skadis T-Nuts System

Ocena
5 / 5
Polubienia
40
Pobrania
132
Wydruki
2
Wyświetlenia
1074
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Took the official screwdriver mount by LTT which was originally designed for their own Magnetic Cable Management Power Bar Key solution and adapted it to be mounted on your regular skadis wall.

It uses the very easy to use Skadis T-Nut system with an M2.5x16 bolt and an M2.5 nut.

Can also be used with M2 bolt and M2 nut, I have provided STLs for both variants.

For more instructions on the T-Nut system please refer to the original creators page here.

Print orientation like in the pictures (plated on the lower angled side). Printing on the backside is not possible due to the T Nut alignment guides.

I have provided sliced files for MK4S which include one (1) T-Nut for mounting. Also one with just the mount if you already have T-Nuts printed.

Tagi