1 / 3
Lamp V10 — zdjęcie 1
1 / 3

Lamp V10

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

3 part lamp which also the light to shine the gaps

Ocena
0 / 5
Polubienia
19
Pobrania
63
Wydruki
0
Wyświetlenia
293
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Home Decor
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

The holder is made for a light blub socket with the following dimensions:

5.75 cm tall and 4 cm in diameter. 

And the hole for the wire is roughly 0.6-7 cm in diameter. 

The lampshade must be printed in vasemode and upside down!

Check the print file for the lampshade if you're unsure. 

You need to print 3 lampshade. 

I printed the base with fuzzy skin on the bottom part. If you have fuzzy skin on the joints on top of the base I won't guarantee the lampshades will fit.  

Tagi