Lamp V10
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€2.33 – €2.85 net (excluding VAT)
For file: lampshade_VASEMODE_0.6n_0.2mm_PLA_MK3S_2h36m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.59 excluding VAT (range midpoint).
- Weight reported by the author
- 32 g
- Print time reported by the author
- 2.61 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
3 part lamp which also the light to shine the gaps
- Rating
- 0 / 5
- Likes
- 19
- Downloads
- 63
- Makes
- 0
- Views
- 293
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial — Share Alike

The holder is made for a light blub socket with the following dimensions:
5.75 cm tall and 4 cm in diameter.
And the hole for the wire is roughly 0.6-7 cm in diameter.
The lampshade must be printed in vasemode and upside down!
Check the print file for the lampshade if you're unsure.
You need to print 3 lampshade.
I printed the base with fuzzy skin on the bottom part. If you have fuzzy skin on the joints on top of the base I won't guarantee the lampshades will fit.