Electronic Components Organizer Boxes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
System of boxes with multiple sizes and a mechanism for connecting them. May be used for electronic or mechanical parts
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 91
- Wydruki
- 0
- Wyświetlenia
- 710
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Inspired by: SMD Connectable container
I use the small boxyes above for all my passives but needed something for connectors, screws, chips and pinheaders.
In my setup multiple boxes are combined as needed and then kept as one tray of similar components. The plan is to mount each tray to a wooden or platic base plate for some extra stability. Once I have something figured out it will be posted here.
Assembly
To connect box and lid, just cut a piece of 1.75mm filament and push it through the opening.
Printing Instructions
- FIlamentworld PLA+
- layer height 0.2mm
- No raft
- No support
- No brim
Feedback Appreciated
Feedback is appreciated and please share your makes for others