Liczymy pasujące modele…
An easy to print and assemble resistor stand. Holds upto 7 resistors (50 mm long) in a single slot. Uses less material. Feel free to modify for larger capacity. Current model made using PETG but can be made using any filament.
I designed my own box because I could not find what I was looking for: There should be 12 columns for E12 series The drawers should be as small as possible, I don't want to take up a lot of space. The resistors should fit in full length,…
The individual windows are connected using connectives. I attach multiple variants to each part so that the user can choose.
Printed on an i3 MK3s+ with the 0.2mm SPEED profile, gyroid infill, and auto infill combination. Do not modify the internal width/depth of the box. Instead, configure the tube pocket sizes and spacing, and the overall dimension of the box…
Corrected version: Thanks to my wandering attention, I'd listed the multiplier for the 2nd/3rd band as 1 TΩ rather than 1 GΩ. In the real world of hobbyist electronics, I imagine that was not such a dangerous blunder, but it's now fixed…
Print and use it to organize your resistors. Stop using your multimeter to check resistance because you dont remember it
Nylon temp tower using slightly lower numbers to accommodate for the 33 ohm resistor mod actual temperatures. Here is the link to the temperature tables/ graph.…
Based on the the 'Economical Resistor Storage Tubes' by John Oldman ( https://www.printables.com/model/650410-economical-resistor-storage-rack ) I wanted to have the values built into the lid as I just got a new Snap Maker U1. This set of…
I like the original storage tubes. I use them for both resistors and capacitors. However, I wanted them to be more portable. I did not change anything about the tubes and lids, only the tray. This tray is taller at 16.6mm and has 2 layers…
This is a simple holder for resistors stored in reels (I don't really know what they're called)
Container with drawer. The drawer is 80 mm deep so it can contain standard resistors. One container consists of 3 parts: the enclosure the drawer the drawer front The enclosure has an hexagon shape. The 6 sides have slits which you can…
this is a small box for stock smd resistor 1206 or other. Print Settings Printer: My printer solotion Rafts: No Supports: No Resolution: Layer 0.2mm, buse 0.3mm Infill: 15% Category: Electronics
This is a case for the Sainsmart Huhushop Mega328 Tester/Meter. This case also contains a battery compartment and sliding panel for access to change the battery. The tester itself will automatically determine the component attached to it…
This is a set of printable resistors and a slider to convert one of the resistors to a potentiometer. These are intended as a demonstration of using 3D conductive filament for creating electrical parts. These model may be of interest to…
This is a stackable box for through hole resistor belts with up to 1000 pcs. Fold the belts in like a zig-zag to get them out smoothly. Print settings: no support 15% infill
There are three mix-and-match styles to the supplied STL files: metric vs. imperial, narrow vs. wide, and long vs. short. The significance of these three styles are, metric : lead spacings in increments of 2 millimeters imperial : lead…
An easy to print and assemble resistor stand. Holds upto 7 resistors (50 mm long) in a single slot. Uses less material. Feel free to modify for larger capacity. Current model made using PETG but can be made using any filament.
Loved the economical resistor storage tubes by John Oldman ( https://www.printables.com/model/650410-economical-resistor-storage-rack )but was sad because it wasn't compatible with my existing gridfinity base. So I knocked up this base…
Questo contenitore è perfetto per conservare componenti elettronici e resistori. Impostazioni di stampa Marca della stampante : Orso volante Stampante : Fantasma 6 Zattere : Non importa Supporta : NO Marca del filamento : Crema Materiale…
Meet Bob. Bob is having a really bad day. He’s crouched over a ticking bomb, sweat pouring down his face, eyes darting between the timer and his “Bag o’ Resistors” —a tangled mess of tiny parts that might as well be spaghetti. The clock…
All the resistor boxes I found here were sized wrong for me so I created my own. I made the drawers a bit larger to hold more resistors. The drawers have the label inserts on the inside as the drawers was designed with using…
Altoids Resistors Storage Tin @ MKE Gadgets #128 I recently been learning how to build and code for Arduino. There are many small parts to keep track of and one of the smallest are resistors. They come in many resistance levels and look…
Minimal supports for the handle. Be sure to print in proper orientation! Essentially, I made the interior of the drawers round, so you can ‘slide’ the resistor up without any difficulty. Note: Try not to tip the container over: the…
Little variable resistors/trimpots are fiddly to store, this gridfinity bin allows you to organize them! They can also be grabbed by the contacts and placed back easily Printed with 0.20 layer height
A resistor holder for the gridfinity system, that can handle longer resistors
A customizer to generate labelled lids that will fit the resistor box design https://www.thingiverse.com/thing:1959310 . Good for any small components, such as resistors, LEDS, capacitors, transistors, etc. Category: Tool Holders & Boxes
A small box for the resistors and diodes of the arduino starter kit. One variant with values and one without.
Intro *-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-* I have been getting in to electronics / esp32s for a while now. I did a large order for all supplies I may need, and have 100 of each common type of resistor. I needed a good way to store them…
Hello! This is an inter-locking box I made mainly for resistors, diodes, transistors, even small parts like M2 screws and nuts and other small electronic components storage. The box is 38 x 38 x 80 mm and has plenty of space inside for…
This is a tiny resistor box (when space matters most). Ohms are labeled on the lid as well as in the bottom of the boxes. Requires 20 3 mm x 2 mm (d x h) round magnets. I glue them using superglue! Let me know if you like this model and…
Initially the box was designed to sort out resistors, but I decided to make it parametric, so you can modify it easily to store any kinds of little things. The default size has 10 sections, each section can store 20 resistors. 3 boxes are…
This is a remix of the diodes bending jig. I enlarged the hole in the center based on a caliper measurement of a resistor and added a base. You must bed the wires forward or to the rear to use (I did not want to make it any taller). I…
Resistors tend to make a huge mess, and once they are torn off their papers they are hard to resort. This is an organizer for resistors, that can be mounted on wall. And hexagons are the best-agons. Print Instructions: 4mm nozzle PLA For…
A simple storage box to store resistors. Stackable. Wide enough for my fingers to actually take resistors out. EDIT 8 jan 2025 added a double box and a 10-box. Kewlox The boxes are 74x74mm so they fit with my Kewlox drawer boxes .…
An organiser for your resistors. I wanted a way to keep resistors tidy, to hand, and easy know what resistor value you were grabbing. I did consider making it larger and spacing them out more, so that they were kept more separated, but…
This a simple hack of a resistor ventThe basic idea is to build a small speaker enclosure and use a resistance vent to minimize the boomimg effect that the small box imposes on the final frequency response. More details here:…
A case to replace the plexi glass case of the kkmoon resistor Case. Designed to existing hardware, but does require shortening of some of the screws. The display is screwed into the case with the screw threading into the plastic. For best…
The block has a hole for the resistor and the legs is bended down, the cover slices over, a dap of glue is a not bad to use. There are 2 covers a thin or a little more beefy. When printing on Prusa slicer you can in the view of the sliced…
I expanded the grid to 11x11 in a 5x5 gridfinity base. Holds 121 capsules
Box with drawers mainly for electronic through-hole components like resistors, but can be used for other stuff. Main difference from other models here: space and filament efficient (designed exactly for my needs) drawers have safety stops…
Little two-part tool for bending the leads of resistors/diodes/other axial components. Fits 20 components at once. Default lead spacing is 10mm, Fusion file can be easily adjusted to other spacings.
I slightly changed FerriteGiant's excellent resistor storage solution in order to cut down on print time. These modified parts save about 24 hours of printing for the full set of 4 frames and 24 drawers! None of the important dimensions…
When you want to explain the Ohm's law you can use this piece. Just place a resistor in the center with the wires going down the holes. Then use two standard “banana” cables to hold it in place and make the connection. You can now connect…
edited the drawer to make my other components fit instead of resistors
Dimensions of the magnet holes are 6.5mm diameter, 2.5mm depth. Fits 6mm x 2mm magnets.
3D printed rotary organizer for resistors library.
Deutsch: Dieses modulare System besteht aus mehreren Komponenten und bietet flexible Einsatzmöglichkeiten. Es kann entweder mit dem Top-Element und doppelseitigem Klebeband an einer Oberfläche befestigt oder einfach frei aufgestellt…
All the 3D printable files for this resistor load bank build to externally discharge LiPo batteries. Shortens the discharge time from hours to minutes! Instructable on the build posted here:…
I made this labeled organizer for electrical resistors. The first file is from 10 to 4.7K and the Second file is from 5K to 1M. The organizers fit a full-sized resistor without bending the leads. The labels are embossed in each compartment.
It is based on another model I saw some time ago, to which I wanted to add some modifications. It is still a work in progress, so I will probably continue to update it. Note: As I mentioned, this is still a work in progress, although I…
I created a full E12 series of resistor labels for the 1x1x1 box and drawer with 3 comapartment. In future i will add more label for extending some values from E24 series and also add labels for small capacitors. I did a manual filament…
Description I used to have my resistors randomly distributed in my drawer organizer, so whenever I needed a specific resistor value, the finding process could be quite long, and they often got stuck. I therefore designed this insert into…
Whereas the original only stored 5 resistors per slot with 11 slots, this model can store 15 resistors per slot with 25 slots. Models with no labels, or two different sets of labels are provided. The Fusion 360 parametric modeling file…
This moderately sized resistor organizer is for (like the name implies), organizing resistors. It has 10 different slots, ranging from 1M ohms to 10 ohms. Hope you like it! NOTE: If you print this (and you like it), please consider…
Created with OnShape: https://cad.onshape.com/documents/69f25f92cf286322e3ede378/w/64538863a6b45e4f25785fab/e/9af81d9c43e683c16ab986c1
Esse é um modelo de um resistor gigante para professores explicarem mais facilmente o código de cores de resistores de 4 ou 5 faixas. Esse modelo é feito oco para utiliza-lo, também como recipiente para levar resistores reais dentro dele.…
I designed a small 3D printed resistor model with interchangeable rings to help teach resistor values and how to read them. By swapping out the rings, students can visually learn how different color codes correspond to resistance values.…
This model shows the insides of a resistor, so it can be explained to students. You can vary the colors of the bands to show different resistances! The “base.3mf” file is optional, you can also use some kind of wooden plate instead.
This model shows the insides of a resistor, so it can be explained to students. IF YOU WANT THE MODEL SPLIT UP INTO INDIVIDUAL PARTS FOR MULTICOLOR PRINTING, VISIT MY SHOP PAGE (3,50$)!!!
!!! Warning: if you are using this you are probably doing something dangerous and should proceed with caution !!! Ever need to test a fuse to see if it will pop under the expected load? I designed this setup to do just that. It's more of…
Remixed to add label holders. I might return to this and put in a stop to keep the drawers from falling out. Printed with minimal support
This is a box to store resistors, the box have magnets to keep it closed. Use a 1mm steel wire for the hinge. Use 2 round magnets glued in the cover, and 2 screws in the botton, heat the holes in the box and tighten the screws. Print it…
Hi there, wonderful people! As you well know, I love closure and latching mechanisms! I've been exploring what are effectively printed springs lately, and it occurred to me that I could use a sprung stopper as a means of keeping something…
This resistance was created for an educational escape game. A clue or a reward can be hidden inside the Cryptex. This is a fun way for students to learn how the color code of resistors is defined. Any resistance value can be set, but you…
A handy resistor lead bending tool designed for quick and accurate forming of through-hole resistor legs. 🔧 Includes: A 6.3 mm spacing slot – ideal for standard 1/4W Arduino resistors A 10 cm gap – useful for larger power resistors or…
Use this to electrify your pontential space. How can you resist this design? This rock hold was designed in OpenSCAD. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: .2 Infill: 20 Filament:…
With an internal depth of 85mm, it will handle most metal and carbon film resistors up to 5W 1 perimeter, 3 shells Extrusion width set to auto or 0.6 Get the 3x3 Gridfinity 16 slot rack for this here
16 slot Gridfinity compatible rack for 24mm Resistor Storage Tubes 4x4 rack fits in 3x3 Gridfinity base
Simply adapted to be printed with genPHA filament from Ecogenesis Biopolymers with ease. The base now has a 3 mm internal brim. Reducing the overall warping that can be caused by large flat surfaces.
This is my system for storing small electronic components. I'm really happy with it, so wanted to share in case others might like one. You'll need a couple of non-3d printed parts, namely: - small wooden display boxes from Daiso (chain of…
I used 8x12cm ziplock bags from aliexpress and a generic stickersheet that I printed onto for the labels. The ziplock bags are convenient because you have a place to put your resistors if you want to keep them after ripping them out of…
Description Needed to organise my collection of resistors. Couldn't find anything suitable so created this one. Features ; 24 drawers, each with 7 compartments. This suits the full E24 series of resistors (from 0.1 Ohm through to 9.1…
I can't ever find the resistor I need and have to sort through a pile of these. It takes forever and this solves that problem.
Knob for encoders and resistors with round shaft 6mm
Replacement grommet ballast rezistor for Unimog/pinzgauer. Printed from TPU96 Náhradní průchodka předřadného odporu Unimog/pinzgauer. Vytištěno z TPU96
Remix with added 2mm label slots (1mm clearance for paper cards). Label cards 16mm x 8mm for easy identification.
This is a Gridfinity storage container for electronic components. It is stackable, can be used with the Gridfinity type magnets, and has 17 individual compartments. I usually put two resistor values in the same compartment, so with one…
Remix of TimMJN's great resistor (and diode) lead bender. This mod does not address functionality, which was great to begin with, only ergonomic issues. TimMJN's original design was very functional and does a great job bending resistor…
Drawer Remix 4 square dividers for the low handle drawer to fit the resistor box found here : https://www.thingiverse.com/thing:3125601 or https://www.prusaprinters.org/prints/7643-various-size-stackable-resistor-storage-box
I am an electronics designer and I really like this build. I have made custom labels for various component that I use. It is currently a work in progress and as I create more I will add them to this profile for you're enjoyment!
en I made myself a box for storing 0.25 watt resistors. There are plenty of storage boxes on the Internet, but they didn't fit my pull-out shelves. besides, I have a large number of resistors and I wouldn't want them to take up a lot of…
This print is a remix of asteven5's Resistor Storage drawers. I needed a stackable design, so I used OpenScad to add grooves to the sides, top and bottom so they can connect. The OpenScad file has been tested for properly fitting top and…
Minimal enclosure for the Adafruit USB Type C CC Resistor Fixer
Just place your resistors in the groove and bend the legs with your fingers... (It fits for perfboards)
(Pardon the many colors of drawers - I was using up old filament and printing drawers in the order of resistor value discovery.) A simple cabinet designed to hold lots of loose resistors. Drawers are designed in length for ¼-Watt…
I made a box for my electronics and cover. Cover thickness is .4mm for transparency. Added also a divider if you want more but small spaces. Just print and glue divider.
This is a simple tool to help you bend leads on resistors or capacitors. I liked this one better than others because it had ridges for the lead along the sides. This was originally made by Robot Room guy on TinkerCad (see link)
The Elegoo sensor kits are just standard sensors mounted on PCBs. This is a perfect 1:1 model of one of the PCBs that Elegoo mount their sensors on. This PCB is the base with the 103 Resistor, used by the tilt switch, shock sensor, photo…
My rig has enough holes in it so instead of drilling more I made this. Sized for PETG Bolts are M3 anything between 7-12mm should work, #6 should work as well The tension fit comes from the 4 "bumps" (shown in the last pic) that protrude…
I designed my own box because I could not find what I was looking for: There should be 12 columns for E12 series The drawers should be as small as possible, I don't want to take up a lot of space. The resistors should fit in full length,…
I had a huge pile of little ziplock bags with resistors. Now theyre all sorted! Provides space for 50 bags, max. 75 mm width, 3.5 mm thickness. Economical design: Wall thickness inner walls: 0.4 mm (nozzle size), outer walls: 1.2 mm…
Printable insulation cover for Sony 1-237-614-XX High Voltage Resistor/H-stat block used within Sony PVM-1943MD CRT TVs.
This is a small, modular storage system designed specifically for organizing resistors. The original problem was very familiar: after breadboard prototyping, all leftover components ended up in one small plastic box on my desk. Finding…
A smal variable box for Ressistors or diodes, that are already bended. Perfect for working with Breadboards. This Version can store up to 120 pcs. If you need more space, you can easily scale The spacer are seperat parts, that fit on any…
The individual windows are connected using connectives. I attach multiple variants to each part so that the user can choose.
Some of my bigger diodes didn't fit the original model so I made a few more sizes for the middle piece
Printed on an i3 MK3s+ with the 0.2mm SPEED profile, gyroid infill, and auto infill combination. Do not modify the internal width/depth of the box. Instead, configure the tube pocket sizes and spacing, and the overall dimension of the box…
This Remix is a smaller version of DragonsHoards Stackable Resistor Organizers. It holds about 20 resistors without the paper tape.
Corrected version: Thanks to my wandering attention, I'd listed the multiplier for the 2nd/3rd band as 1 TΩ rather than 1 GΩ. In the real world of hobbyist electronics, I imagine that was not such a dangerous blunder, but it's now fixed…
