Resistor Storage Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small (200x45x80) storage drawer for 24 diffenent resistors types.
- Ocena
- 5 / 5
- Polubienia
- 49
- Pobrania
- 346
- Wydruki
- 5
- Wyświetlenia
- 2070
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
Hi
this is a storage box with room for 24 different resistor types.
The model was inspired by @asteven5's model but due to lack of space in my toolbox smaller in height.
Size is 202 x 42 x 80
The walls of the Hull is quite thin for its size. This leads to the classic box warpage, preventing the trays to slip out. (Its not a bug, its a feature)
Print instructions:
I had some trouble printing the model with only one thick perimeter.
Prusa slicer added some extra infill on every T connection.
Also some mysteriouse wipe movements were added on every layer.
Therefore I ended up with a wall thickness of 0,9 hence two standard perimeters as seen in my Gcode.
Also the Arachne perimeter generator added strange movement therefore classic was used.
Happy printing