Resistor storage box with stoppers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Resistor storage with stoppers.
- Ocena
- 5 / 5
- Polubienia
- 38
- Pobrania
- 243
- Wydruki
- 3
- Wyświetlenia
- 1191
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
I have seen a few resistor storage boxes, but non of them had stoppers. This one is a slighly bigger taller version of stratose's design with additional stopper, so they won't fall out in case you tilt it.
I bought this set:
https://a.aliexpress.com/_mPF4uHS
It should be more than enough for beginners.
A 6x5 storage box uses 290g of filament.
The walls are designed for 0.5mm nozzle, they are 1mm thick, If you are using 0.4 mm nozzle, then I recommend setting the line with to 0.5 mm. I printed it from PLA, if you need anything stronger than that, then you are absuing it.
There is a simple box and frame uploaded, so you can test if it will fit your needs or not and I also added step and ipt files. If you need a custom size, then I am happy to help with that.