1 / 9
Head Tracker Module Case
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a case for Arduino Nano 33 BLE for use with the excellent Head Tracker…
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 745
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a case for Arduino Nano 33 BLE for use with the excellent Head Tracker project.
https://headtracker.gitbook.io/head-tracker/
I built this case to use the tracker in Bluetooth wireless mode, so it only includes a power connector and reset button.
There are 2 versions of the back plate; a flat one for attaching to any flat surface, and a curved one for attaching to the side of the DJI goggles.
Parts required
- Arduino Nano 33 BLE
- 6mm micro switch (mine uses the 8mm tall version because that’s what I had on hand)
- JST PH 2.0mm plug and socket for power. These plugs commonly used as 1S battery connectors.
- Two 2x5-6mm countersunk screws to hold the back on
Category: R/C Vehicles