Small Terrace / Bridges for GraviTrax
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A bridge and a small platform supported by two pillars for use with GraviTrax.
- Ocena
- 0 / 5
- Polubienia
- 24
- Pobrania
- 133
- Wydruki
- 0
- Wyświetlenia
- 412
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A bridge and a small platform supported by two pillars for use with GraviTrax.
While I've printed many bridge models, I've consistently faced challenges with warping and bending, especially with longer spans.
To mitigate these issues, I've incorporated several design changes.
First, in order to prevent the corners from warping, I'm rounding the edges a little bit.
Additionally, to reduce overall bending, I've maintained a uniform thickness of 5mm throughout the bridge, sacrificing some aesthetic appeal for structural integrity.
-----
Note : In my opinion, for long bridges, adding an outer brim has been essential.