Dart Ring Light V2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Made an update for my first design. This ring light is connected by magnets to the dart board.
- Ocena
- 5 / 5
- Polubienia
- 48
- Pobrania
- 582
- Wydruki
- 5
- Wyświetlenia
- 3460
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Indoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is my new design for a diy darts ring light.
Connected to the dart board by four little magnets in each feet. I glued the magnets in place with some glue (based on cyanacrylat).
I used this LED strip: https://www.amazon.de/dp/B0B24M5NYC?ref=ppx_yo2ov_dt_b_product_details&th=1 : 2 m
Use the cable channel to clamp the LED cable to the side of one of the feet.
Separate the file in your slicer (right click on the model > separate > to objects) and multiply the parts using the print list.
Print List:
- 9x ring element
- 3-4 feet
- 9x connectors
- 1x cable duct
Other Parts:
- 12-16 neodymium magnets (4 piece per feet) D=10 mm, t=2 mm
- LED strip (2 m)
- glue (based on cyanacrylat)
Print Settings:
- i used PLA+
- no supports