Dart Ring Light V2
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Made an update for my first design. This ring light is connected by magnets to the dart board.
- Rating
- 5 / 5
- Likes
- 48
- Downloads
- 582
- Makes
- 5
- Views
- 3,460
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Indoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is my new design for a diy darts ring light.
Connected to the dart board by four little magnets in each feet. I glued the magnets in place with some glue (based on cyanacrylat).
I used this LED strip: https://www.amazon.de/dp/B0B24M5NYC?ref=ppx_yo2ov_dt_b_product_details&th=1 : 2 m
Use the cable channel to clamp the LED cable to the side of one of the feet.
Separate the file in your slicer (right click on the model > separate > to objects) and multiply the parts using the print list.
Print List:
- 9x ring element
- 3-4 feet
- 9x connectors
- 1x cable duct
Other Parts:
- 12-16 neodymium magnets (4 piece per feet) D=10 mm, t=2 mm
- LED strip (2 m)
- glue (based on cyanacrylat)
Print Settings:
- i used PLA+
- no supports