Counting matching models…
This Throttle goes along with my G1000 setup . Its main feature is the simple design and slim layout, which (unlike regular Throttle quadrants) fits on a desktop. Instead of rotary potentiometers and a clumsy gear mechanism, it uses 100mm…
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for one variant
NOTE: You find the new and improved version 2 here: https://www.printables.com/de/model/326872-air-traffic-controller-board-v2 Warning: The 60 degrees base seems to be misaligned, I'll remove this message when I've fixed this! Update…
Print approx. €0.71–€0.87 excl. taxPreliminary estimate for one variant
These labels are often used in aviation to protect certain sensitive parts of aircraft. They are brightly coloured to ensure that they are seen and removed before the flight. For that reason, I thought it made sense to put something…
Print approx. €0.09–€0.12 excl. taxPreliminary estimate for one variant
On aircraft Remove Before Flight safety tags show that items have to be removed. A friend asked me to make this just for fun, modeled after his key chain version. I printed this in ASA and finished it with Humbrol paint, but printing in…
Print approx. €1.19–€1.45 excl. taxPreliminary estimate for one variant
"Remove Before Flight" Keychain tag
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for one variant
This is my tag i use on my drone, looks and works great. Printed in two halves and glued together. Us velcro straps to attach. ENJOY! Print instructions This is the tag i use on my drone, looks and works great. Printed in two halves and…
Print approx. €1.39–€1.70 excl. taxPreliminary estimate for one variant
The next member of my Flight Simulation Sixpack family has arrived: A fully 3D printed Altimeter without need for any metal axles. Articulation by a standard stepper motor similar to the Attitude Indicator and an encoder for the Baro…
And finally a fully 3D printed Turn Coordinator. Articulation by two standard stepper motors similar to the Gyro Compass. Adapted spacer frame is included in this model to hold the marking frame. Update 2024-12-21: Fusion 360 Source added…
Hello, here's a small project that I designed. I wanted to combine a small ESP32-C3 Super Mini with an VL53L1X / TOF400C sensor and keep the whole thing as small and modular as possible. Later on, the project will be used with ESPHome and…
I noticed a saddeningly small amount of models online for the Arleigh Burke destroyers, and so I decided to simply do it myself. This is the flight I variant of the destroyer, and whether or not I'll make the models for the other flights,…
IMPORTANT NOTICE I do not keep my designs updated on printables anymore. To ensure you download the the most up-to-date models, please visit this design on my makerworld account: https://makerworld.com/en/models/20761 Thanks for your…
!! Do not print this (yet) !! Small Update 20.09.2022: Pictures of the MVP are now up, and I still have some software bugs, but everything mostly works. The parts uploaded can build a throttle, but I'm still far from the finished product.…
This Universal HOTAS/JOYSTICK CHAIR MOUNT w/ Optional Cup Holders has holes to mount a Virpil Mongoose CM3, VKB Gladiator EVO, Thrustmaster T.16000m Joystick/Throttle, Turtle Beach Flight Deck Joystick/Throttle and more. You can always…
You can use the S-Carabiner https://www.printables.com/de/model/187236-s-carabiner for attachmend.
Print in place Twin Concorde Flightcase Replacement – 3D Printable Model This 3D-printable replacement for the "Twin Concorde Flightcase" is designed to securely store and protect two Ortofon Concorde-style DJ cartridges. The case…
Next level Racing Flight Simulator holders to rest the quest 3 controllers for those who use them
Imprimir con la inscripción Remove Before Flight hacia arriba, impreso con la función de cambio de filamento, altura de capa 0.2 y boquilla 0.4.
I thought danowar's "Remove Before Flight - Gimbal Protector" was so clever, that I wanted one for my Futaba T16SZ. I recreated the cross bar in TinkerCad to resize it for 110mm centers, and I enlarged the guard ring to 51mm to fit the…
Different knob shapes for converting a Behringer X-Touch Mini for flight sim VR use. Use https://dev-tty.nl/X-Touch-Mini-FS2020/ for direct integration to MSFS2020 update: added some more knobs Print Settings Printer Brand: Prusa Printer:…
IMPORTANT NOTICE I do not keep my designs updated on printables anymore. To ensure you download the the most up-to-date models, please visit this design on my makerworld account: https://makerworld.com/en/models/20759 Thanks for your…
IMPORTANT NOTICE I do not keep my designs updated on printables anymore. To ensure you download the the most up-to-date models, please visit this design on my makerworld account: https://makerworld.com/en/models/402697 Thanks for your…
Introduction I am new to the flight simulation hobby, 3D printing, and CAD design, so please be patient with me. I decided to create my own throttle quadrant to enhance my immersive experience. This is intended for flight simulation…
Hello makers :) I designed a tag with “REMOVE BEFORE FLIGHT”. I have done this especially for the Prusa XL, but you can also use it for whatever you want. But then you dont need the Prusa XL Adapter part. You can choose between 2 types of…
Yet another “REMOVE BEFORE FLIGHT” tag. I used mine to remind me where I left the key to my eMTB. I'm not saying I spent a bit too much time searching for the key before I realized it was in the bike and decided to make something to make…
A 57 mm compass for flight simulation. The code i am writing for this is on github(https://github.com/Gijs-De-Munck/Flightgear-cockpit), this repo uses an arduino mega to controll a altimeter, airspeed indicator, compass, variometer and a…
made a set of my own darts. Had to design some flights. Drawn from original Jarts. Wings are a little thicker than the original by .020" for strength. Inner diameter is .300" outer diameter is .500" wings are .060" thick
Printing parameter: Resolution: 0.2 mm Infill: 15 % Supports: no Color changes: Start with red Change to white at 1.2 mm Change to red at 3.2 mm
KN62A DME For Flight Simulator Details in the YouTube Description: https://youtu.be/dYClLvKb3Dk
This cradle and tumbler was created so that I could code the function buttons on my velocity one controller for my XBox system with multiple button press capability to achieve 5 layers of function button options. The cradle sits next to…
A trim switch for flight simulators similar in size and design to the Honeywell 200-09187-0000 trim switch used in Diamond aircraft and others. In contrast to the original switch, both handle parts are fixed together for simplicity. Use…
Small cover for exposed flight controller board on tinywhoops with 25.5mm mounting Part is showcased in video above.
Automatic Direction Finder (ADF) instrument. Can be used for flight simulator. Can be controlled with MobiFlight. It is compatible to mrusk's Modular Cockpit Material needed: 2 Screws M3x6 2 Screws M3x10 4 Screws M4x10 4 Screws M4x20 1…
In case you see RED on your fuselage the lock is not latched correctly and you need to check it. Green means GO. This lock enables the user to quickly spot a mistake in order to rectify it before flight! You still need part 2 and 3 to…
a 3D printed TPU Pitot tube mount for a REMOVE BEFORE FLIGHT tag. I made this for my RC VTOL using Arduplane 4.3 Enjoy !, Dave
Pretty simple model, used with the colour change functionality. After it is finished you can slide the ring onto something and superglue the slit.
If you find my designs useful, please consider sending a tip UPDATE: Dec 2024: Fixed the messed up HotasX_ExtensionBaseStreamDeckHousing_v1 model! Original blurb from 2019: I have remixed the excellent "Thrustmaster HOTAS X T.FLIGHT…
My old fabric “REMOVE BEFORE FLIGHT” keytag was getting a bit tired when Prusa held a contest for innovative key tags. I decided it was time to replace it. I wanted something printed in a sturdy plastic, but which would be flexible enough…
A dreamy flight above the clouds (two colours)
Resized and combined for easier printing. I printed the entire bomb with TPU for resilience from both the impact from dropping the model and the firework going off. A 7mm brass tube in the nose cavity will reenforce the cavity and provide…
A holder for a MAX7219 7-Segment LED Display. Can be used for flight simulator, e.g. as “Distance Measurement Equipment” (DME). Can be controlled with MobiFlight. It is compatible to mrusk's Modular Cockpit Material needed: 4 Screws M3x6…
I have created this Align Trex 450 anti-rotation platform with integrated Matek G474-Heli case (Rotorflight). Let me know if you have any suggestions to improve my design or have any questions, let me know in the comments. Thanks :)…
Replacement side button cover for the HyperX Cloud Flight S Wireless Headset. Minor adjustments may be needed. Note : It is recommended to print this part in ABS, as the Qi wireless charging area can get quite warm during use. Creality…
This is a Tag, you can stick to your lens cover of your fiberlaser. So you'll never ever forget to remove the cover before you laser-engrave. I was inpired by the “remove before flight”-tags in aerosoace hangars
I started this project to build my own six-pack gauges for flight simulation, but I used a 4-inch LCD screen instead of 3D-printed physical parts and stepper motors because I don’t like the noise they generate. The display is a 4-inch LCD…
Holds the GPS module, in nice and tight without and adhesives or worry! NBD Inertia - SMA and standard DJI antenna mounts Mounted on a TBS SourceOne V5 in Pic. Printed in TPU - 3 Perimeter 30-40% Infill Check my profile for more upcoming…
I made this tag. It has a hole for a keyring. the text is 1mm and the base plate is 3mm, Enjoy!
Intended for printing with 0.2mm layers with color swaps on the fourth and seventh layer. No supports are needed (The bridging in the lower letters should be negligible, but scaling the tab up might cause some droop) The split ring can be…
A very easy-to-build Airspeed Indicator for flight simulation. Material needed: 2 pc 28BYJ-48 stepper motor with ULN2003 driver board 1 pc EC11 Encoder (15mm Plum) 1 pc Ø 79mm x 0.2mm transparent foil. 3 pc Screws M4x25 4 pc Screws M4x10…
I needed to buy some rubber pucks to safely jack up my car without crushing the frame rails. This is common on Corvettes, BMWs and other sports cars. I wanted a way to easily index the rotation of them (twist 90° to remove) and I wanted…
Included some small colored plugs if you glue the project. Alternatively it supports the M3 use as per the original.
I added this to my Prusa buffer loader as I too often forgot to remove the loader before print. Now in case I see that button I remove the loader before flight resp. print. The files section contains a lot of variants, why don't you try…
Fits with flight fins and thundercat
What is this? A 3-inch, 3-blade propeller for small drones. I designed it with AI (Claude), tested it in a computer simulation, printed it in tough resin, and flew it on my own drone. This is my own design, not a copy of a Gemfan file. I…
I like to use long antennae on my higher output multirotor builds, but this makes transportation awkward unless you remove the antenna. I typically use stubbys just tp make sure that I dont burn my VTX plugging in a battery without…
Lost a side plate after a crash. Temporary fix while I wait for new ones to come in.
This is designed to plug the transmission side of a Torqueflight 904/998/999 torque converter. You can use this if you need to store or ship a torque converter to keep dust out, or prevent leaking. I designed this for my AMC 360 run…
A remix of Printojet's amazing design. Strong enough to be used without the front bar support with 2 sets of stiff springs. Bolt fork much stronger to cope with sudden joystick end-of travel bumps. Designed to have no flex with PLA <40%…
my original antenna broke and I couldn't find one as long, so I created a holder that is in front and any antenna can be PLA/PTG/TPU 20-100% no supports
This is a little mudguard for the iflight Nazgul HD / iflight XL5 V5. I got a Caddx Vista System sitting in the back and wanted to protect it from wet grass etc. It clips right on the Standoffs. For the right Side just mirror the Design.…
This Universal HOTAS/JOYSTICK CHAIR MOUNT w/ Optional Cup Holders has holes to mount a Virpil Mongoose CM3, VKB Gladiator EVO, Thrustmaster T.16000m Joystick/Throttle, Turtle Beach Flight Deck Joystick/Throttle and more. You can always…
For an Internet of Things Arduino class, I made a modded version of an F-16C Viper flight stick, and for an Arduino Mini and some Arduino kit supplies, the game I was playing at the time of making it was Elite Dangerous, and so I put the…
Herby my ruler which I've used during my flight training. it has different notches that matches different speeds vs 2min flights
Ich habe mir Dart flight halter gedruckt auf grund das sie immer wieder nicht im rechten winkel waren und ich somit ein besseres Spiel habe gedruckt wurden sie mit Pla müssen ja nichts großes halten und 15% infill
Print in place Twin Concorde Flightcase Replacement – 3D Printable Model This 3D-printable replacement for the "Twin Concorde Flightcase" is designed to securely store and protect two Ortofon Concorde-style DJ cartridges. The case…
Grip for flight simulation 0.16 layer height is recommended All the components are avaiable on : https://polysim.fr How to assemble : https://www.youtube.com/watch?v=2aSrMxbHL8U&ab_channel=Polysim
I couldn't find the Throttle Lever for a lost CH Products Flight Yoke, just the Mixture and Prop Levers were available. I printed it in Polymaker ASA normal settings without supports.
Virpil Ace Flight Pedals Backstop to adjust pedal resting position. Various size stops to raise the pedal resting position to make it more comfortable and scale the axis down. Assembly -Remove original rubber rear stops -Printed should…
This is designed to plug the transmission side of a Torqueflight 904/998/999 torque converter. You can use this if you need to store or ship a torque converter to keep dust out, or prevent leaking. I designed this for my AMC 360 run…
I didn’t like the stock TCA flap lever — it lacks the normal A320 “lift to move” action, which led to accidental position changes. So I designed a replacement flap lever with a proper pull-to-move mechanism and tactile detents. It feels…
I wasn't satisfied with the Logitech Saitek Throttle quadrant and wanted something that more closely simulated the experience of flying a Cessna 150/152. So, taking inspiration from other projects (including this one ) I set about…
Lost a side plate after a crash. Temporary fix while I wait for new ones to come in.
Complete lids can be ordered from https://flightpack.eu/products/flightpack-lid-for-torquebox Custom lids for the TFL torquebox 1 and 2 as wall as the Fungineers blackbox. For use in combination with the XR flightpacks. Might not fit with…
made a set of my own darts. Had to design some flights. Drawn from original Jarts. Wings are a little thicker than the original by .020" for strength. Inner diameter is .300" outer diameter is .500" wings are .060" thick
It's an adapter to mount a tiny whoop or toothpick aio Board in an fpv drone frame with a 20x20mm mount. You should probably print it out of temperature resistant plastic, those aio board get very hot and pla might deform if the drone…
Bring the Dymon 4000 Single Engine experience into your home cockpit with this complete DIY kit. A realistic single-engine throttle and control module inspired by modern general-aviation aircraft. No electronics knowledge required — just…
Version 1.4 — Stronger, Stiffer, More Stable (Updated from Version 1.2) 🌀 3D Flight Lab Drone Gyroscope – STL Files for DIY Printing, Testing & STEM Projects by Binary Box LLC The 3D Flight Lab Drone Gyroscope just got a major upgrade.…
The stock tailpiece for the iFlight Nazgul Eco frame had an angled XT60 connector, which made it impossible to position LiPos with short wires properly. This set has original XT60 and SMA connectors in better positions and has space for a…
This is my V3 hand-launch glider , developed through multiple design iterations with a focus on real-world flight performance, stability, and ease of printing . Compared to earlier versions, V3 introduces meaningful aerodynamic and…
Created this wall mount for Moza AB9 accessories. I had extra stick shift and flight stick that I wanted to hang it on the wall and this wall mount helps it organize it little better.
added wall mount, i use old bicycle spoke wire for my bird models these are strong and none corrosive and allow you to position the birds in more positions the birds are best painted more fun
January 2026 Uploaded 3mf file so you can already print things. An update with instructions will follow shortly....stay tuned.
A simple insert that holds a 6x3mm magnet and is secured to the case by by press fit into the bottom honeycomb. To get the magnets in the correct location on the lid I placed a second magnet over the one inserted in the mount, placed a…
Here you find parts/accessories for the IFlight Nazgul5 v2. I have attached photos of the print orientation for the TPU feet. RX antenna mount will also work for any FPV with post 20mm apart. Feel free to let me know if you any…
Case for K-flex flights, or flights with stems, just add hairtie or rubber band.
A very easy-to-build Airspeed Indicator for flight simulation. Material needed: 2 pc 28BYJ-48 stepper motor with ULN2003 driver board 1 pc EC11 Encoder (15mm Plum) 1 pc Ø 79mm x 0.2mm transparent foil. 3 pc Screws M4x25 4 pc Screws M4x10…
A hook designed to attach to the edge of an open flight case, providing a convenient spot to hang DJ headphones while using your turntable. Perfect for DJs, audio technicians, or anyone looking to keep their workspace organized. Fits a…
These side plates are designed for my iFlight Nazgul Eco DC 5" FPV drone to protect the electronics from debris while providing easy access to the FC's USB port and the VTX's SD card slot. At the front, there is a space for the Vifly GPS…
This is an adapter plate for the Virpil CM3 for the nextlevelracing boeing military fight sim rig. It's intended to replace the bottom metal plate of the throttle with the existing screws. An alternate version that uses much less plastic…
If you downloaded the model, it means you are interested in it. Don't forget to like it, please!
This is the current beta version of my 3D printed glider. The airframe is lightweight, clean, and easy to assemble, designed for quick prototyping and iterative testing. ⚠ Beta Status The glider flies, but the center of mass is currently…
Stratoflights Halterung für Experimente. Halterung an den Holzstab stecken.
The original pinholder has a tendency to break with age. A simple fix for an expensive piece of gear.
The model is to mount the iFlight BLITZ M10 GPS V2 - 25x25 GPS on a V3 frame which replaces the O4 canopy.
Made with a light weight AI Model I have installed on my laptop. No Internet required. You might recognize the image used from a token I created and gave away in the past. The Mesh was then cleaned and sculpted by me as a Blender lesson…
The High-Performance Free-Flight Glider is designed to bridge the gap between "toy" gliders and engineering projects. I moved away from a complex V-tail design to a standard T-Tail configuration to ensure maximum yaw stability and to…
Created as lesson in software workflow. From image to manifold model. I learned core Blender edit functions. I hope you enjoy my creation. Programs used: GIMP, Hunyuan 2.3 Lightweight AI and Blender. This model is by no means completely…
Replacement side button cover for the HyperX Cloud Flight S Wireless Headset. Minor adjustments may be needed. Note : It is recommended to print this part in ABS, as the Qi wireless charging area can get quite warm during use. Creality…
![[v2 abailable!] ATC Flight Progress Strip System](https://media.printables.com/media/prints/57584/images/605984_6bf0de79-4719-4c62-8bae-7d132891ef8d/img_20210221_144815.jpg)
