Rustler 4x4 SkyRC GPS Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An easy to print, easy to install friction fit mount for the SkyRC GSM020 GPS
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 131
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
As the title suggests, this is a mount for the SkyRC GSM020 GPS for the Traxxas Rustler 4x4. This was designed with the legacy Rustler 4x4 chassis, but I believe it will fit any other Traxxas low-cg chassis vehicle. If you can print and test it, please comment if it fits!
I printed this in Polymaker Polylite ASA, but anything like PLA, PETG, and any other mostly rigid filament should work.
I used four M3x8 screws, but you could get away with using two M3x6 ones if necessary. It also requires two M3 nuts or any ~2.5mm M3 spacer (I've included a printable one as well). I designed it to print flat so spacers are needed for two of the screws.