Rustler 4x4 SkyRC GPS Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An easy to print, easy to install friction fit mount for the SkyRC GSM020 GPS
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 20
- Makes
- 0
- Views
- 133
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
As the title suggests, this is a mount for the SkyRC GSM020 GPS for the Traxxas Rustler 4x4. This was designed with the legacy Rustler 4x4 chassis, but I believe it will fit any other Traxxas low-cg chassis vehicle. If you can print and test it, please comment if it fits!
I printed this in Polymaker Polylite ASA, but anything like PLA, PETG, and any other mostly rigid filament should work.
I used four M3x8 screws, but you could get away with using two M3x6 ones if necessary. It also requires two M3 nuts or any ~2.5mm M3 spacer (I've included a printable one as well). I designed it to print flat so spacers are needed for two of the screws.