1 / 1
Wera 8009 Holder - Honeycomb Storage Wall (HSW)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of the Skadis version of the Wera 8009 Holder.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 81
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (10)Powiązane
Remixed the Skadis version to hold the Wera 8009 Zyklop Pocket as well as the extension.
Printed in Silk PLA, but any PLA/PETG should work. I used 3 walls with Cubic infill. The insert is a snug fit into a HSW Hollow Insert and can be pried out with a flat head screwdriver if needed.